2021 BH-USA Holiday & Shut-Down Schedule

Weighted Compounding Bracket

  • Hot-dipped galvanized
  • Drill punched mounting holes
  • Includes 10 lb. split lead weight installed in the middle
  • Shackle mounting to one end
  • Accepts up to 5/116 in. cable
  • Adds weight to either side of the cable
  • Easy to install

$83.85

About this Item

  • Hot-dipped galvanized
  • Drill punched mounting holes
  • Includes 10 lb. split lead weight installed in the middle
  • Shackle mounting to one end
  • Accepts up to 5/116 in. cable
  • Adds weight to either side of the cable
  • Easy to install

Weighted Compounding Bracket

The Weighted Compounding Bracket adds weight to each side of the boat lift cable under the compounded pulley. Hot dipped galvanized steel. Easy to install. Designed to safely add cable weights to a lift that has compounded cables. Proper use of the bracket will allow the cable to travel through the block with no obstructions that could damage the cable.

The flat bar measures 2 1/2 in. L x 3/8 in. W x 8 in. H. The shackle mounts at one end, the 10 lb. split lead weight in the middle, and the open hole is for a block (sold separately).

The 5/8 in. 3.25 Ton Galvanized Screw Pin Shackle is hot dipped galvanized per ASTM A153 standards. Features a heat-treated screw pin for securement. Manufactured out of forged steel then galvanized. Designed frequent removal. Permanently marked with size and working load limit (WLL), in tons. Designed to lift up to 3.25 tons of weight.

The 10 lb. Split Lead Cable Weight measures 3 3/4 in. wide and 3 in. height. Mounting fasteners included. Separates in the middle and is adjustable to whatever height you want on the cable. The split design gives the ability to tighten the weight to a fixed position on the cable. The cable weights help prevent the cable from bunching up by adding extra tension, keeping it straight on the pipe.

Specifications

Material: Lead
Type: Split
Style: Ball
Size: 4 in. L x 4 in. W x 4 in. H
Accepts: Up to 5/16 in. cable
Cable Type: Clamp (w/ shallow groove)
Fasteners: 2
Fastener Type: Bolts
Fastener Finish: Hot-dipped galvanized
Fastener Size: 5/16 in. x 1 1/2 in.
Type Anchor Shackle
Pin Style Screw Pin
Working Load Limit 6,500 lbs
Width Between Eyes 1 3/8 in.
Pin Dia. 5/8 in.
Body Size 1 5/8 in.
Body Material Forged Steel
Finish Galvanized
Pin Material Forged Steel
Raised Stamp (WLL) 3.25 T
Flat Bar Dimensions: 2 1/2 in. L x 3/8 in. W x 8 in. H
Mounting Holes: Drill punched

Tech Guides

Overhead Boat Lift Guide

Reviews

0 review for #Weighted Compounding Bracket

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top