2021 BH-USA Holiday & Shut-Down Schedule

The Max – 12,000 lb. Overhead Top Beams

  • Heavy Duty
  • Rated Up to 12,000 lbs.
  • Virtually No Maintenance
  • Engineered by BH-USA
  • Ready to Install
  • Perfect for High Volume Docking

$6,213.46

SKU: BH09424 Categories: , ,

About this Item

  • Heavy Duty
  • Rated Up to 12,000 lbs.
  • Virtually No Maintenance
  • Engineered by BH-USA
  • Ready to Install
  • Perfect for High Volume Docking

The Max – 12,000 lb. Overhead Top Beams

The Max – 12,000 lb. Overhead Top Beams is everything the 16,000 lb. boat lift has except it does not come with slings or boat cradle. Designed & engineered by BH-USA with professionals & marinas in mind. Designed for heavy use and longevity. Twin high-efficient belt-less drives powered by heavy-duty 1 1/2 HP stainless steel IP sealed motors. Features innovative Max drive systems. Guarantee straight and strong installation. Gives drive pipe pre-greased sealed ball bearing sleeves. Weather protected with a strong steel enclosure for the bearings and cable while providing a strong platform that has been tested up to 5,000 pounds, deadweight each.

The optional bottom plate helps keep insects and bird nests out, helping to prolong the life of the lifting cables and giving a clean finished look. Lift points drilled for 10′ distance. It is powered by high-efficient 1 1/2 HP stainless steel A-Drive direct drives, leaving no maintenance and no belts. Made by BH-USA.

7 x 19 Aircraft Cable

The Max uses a strong 7 x 19 stainless steel aircraft cable. Compounded using the 4″ ball bearing blocks. Includes BH-USA factory rated polyester weighted 6″ wide, 12,000-pound boat lift slings. Perfect for marine and yacht club docks. Bunks not included with cradle option. Designed for heavy use and abuse with virtually no maintenance issues. Comes complete to install with all hardware, pre-drilled drive pipes, and pre-wired motors. Installation is quick & simple. Individually crated and ready to ship today. Manufactured and designed by BH-USA.

Includes:

(2) #20211 – Max Direct Drive Ball Bearing Hoist Hanger
(2) #20212 – The Max Direct Drive Pipe Support
(1) #36481 – 12,000 lb. Max Lift Hardware Kit
(4) #70148 – Boat Lift Style Cable Winder – 2 3/8 OD (Single Direction)
(2) #BH07295 – 7K 2″ A-Drive Shaft
(1) #93104 – Elite 1 1/2 HP Stainless Steel C-Face Boat Lift Motor
(1) #93104-40 – Elite 1 1/2 HP Stainless Steel C-Face Boat Lift Motor
(2) #BH04777 – A-Drive 40:90 Enclosed Gear Box
(1) #BH02158 – 4″ 3 Ton Ball Bearing Block – Set of 4
(2) #15282 – Max Galvanized Drive Pipe – 2 3/8″ OD (2″ ID)

Specifications

Boat Lift Capacity: 12,000 lbs.
Top Beam Dimensions: 14 ft. L x x 3 1/2 in. W x 6 in. H
Top Beam Type: 12.5 lb. structural I-beam
Top Beam Finish: Hot-dipped galvanized
Drive Pipe Dimensions: 14 ft. x 2 3/8 in. OD (2 in. ID)
Drive Pipe Type: Sch. 40
Drive Pipe Finish: Galvanized
Pipe Supports: Max Drive
Pipe Support Type: Sealed ball bearings & cable winders
Pipe Support Fits: 4 in. W flange beam
Cable Configuration: 2 part
Cable Diameter: .313 in.
Cable Length: (4) 50 ft. sections
Cable Type: 7 x 19 aircraft cable
Cable Style: Stainless steel
Compound Pulleys Galvanized Ball Bearing Rated, Snatch Blocks 4 in. 3 Ton Each
Fasteners: Stainless Steel
A-Drives: 7,000 lb. Rated Each
Gear Type: Double Worm (High Efficiency 40:90 Ratio)
Motors: 1 1/2 HP Stainless Steel IP Rated Enclosed
Voltage: 240 Volts
Drum Switches: (2) Spring Loaded for Marine Use
GFCI Protected: Yes
Lift Speed: 2' per Minute (Tested 24" in 58 Seconds)
Shipping Container: 177 in. x 33 in. x 16 in. wood crate
Motor Brand: Elite Motors
Lift Points: Pre-Drilled for 10' Apart
Cradle Bunks: NOT INCLUDED
When choosing the cradle option, the cradle comes complete with a chock angle for two bunks, guidepost stanchions, and guideposts. All hardware is included, the wood bunks are not included. Cable and block savers are included with the cradle to keep cable and block from going into the water. The BH-USA Max lifts ship complete in one shrink-wrapped 15ft wood crate. The Lift is shipped via a freight truck and will not be able to be unloaded without a fork truck. It is the purchaser's responsibility to arrange a suitable delivery location, preferably a business, and have adequate ability to unload the lift from the truck. It is not the trucking companies or BH-USA's responsibility to unload the truck. The freight company will contact you if requested to arrange for delivery and delivery options. By using cradles instead of slings the overall rating of the lift becomes 12,000 lbs.

Reviews

0 review for #The Max – 12,000 lb. Overhead Top Beams

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top