About this Item
- No Weld Design
- Marine Grade 6061-T6 USA Aluminum
- Rated Up to 12,000 lbs.
- Aluminum Bunks Included
- Stainless Steel Fasteners Included
- Complete & Ready to Install
Meredith & Sons 12K Four Post Pile Mount Boat Lift
The 12,000 lb. Aluminum Four Post Pile Mount Boat Lift mounts to the pilings of a dock. The lift uses a 5/16 in. x 33 ft. boat lift cable in a compounded configuration for its 12,000 lb. lift rating. Features an all-welded, hot-dipped galvanized steel finish. The lift includes (2) top beams with dead man brackets, cradle beams, chock brackets, guideposts, boat hoists, (2) electric motors, boat lift cable, mounting fasteners, and hoist covers. Long bolts to mount the brackets to the pilings not included. No Bunks included. Special Packaging with a bulk order.
A-Drive Direct Drive Pile Mount Boat Lift
(2) #84884-36 – 12K – 20K 12′ 6″ Coastal A-Drive Top Beam
(1) Hardware Kit for Meredith & Sons
(1) #93092 – Elite 1 HP Stainless Steel C-Face Motor – Maintained / 110v / 16 ft. Control Cable
(1) #93092-45 – Elite 1 HP Stainless Steel C-Face Motor – Maintained / 110v / 45 ft. Control Cable
(2) #BH04777 – A-Drive 40:90 Double Worm Reducer Gearbox
Freight Shipping Policy
Questions about shipping? Review our shipping policy.
Specifications
| Capacity |
12,000 lbs. |
| Cable Diameter |
5/16 in. |
| Cable Make |
Stainless Steel |
| Cable Length |
36 ft. |
| Cable Configuration |
Compounded |
| Minimum Piling Size |
8 in. (diameter) |
| Electrical |
UL, NEMA, GFCI Protected |
| UL File |
E464499 |
| Limit Switch Bracket |
Bracket Included, Limit Switch Optional |
| Packing |
Wood Crate 15 ft. x 2 ft. x 2 ft. |
| Weight |
900-950 lbs. |
12K-20K Aluminum Four Post Pile Mount Top Beam
| Lifting Capacity: |
10,000 lbs / Beam |
| Top Beam Dimensions: |
12 ft. 7 in. L x 3 1/2 in. W x 6 in. H |
| Top Beam Type: |
Channel |
| Top Beam Material: |
6061-T6 US Aluminum |
| Drive Pipe Finish: |
Hot-Dipped Galvanized |
| Drive Pipe Type: |
Sch. 40 |
| Beam Weight: |
4.715 lbs. / ft. |
| Pipe Bearings: |
4 / Beam |
| Pipe Bearings Material: |
Bronze |
| Bearing Maintenance |
Grease Fittings |
| Grease Fitting Size: |
1/4 in. |
| Cable Winders: |
2 |
| Cable Winder Style: |
Side-Mounted (Boat Lift Style) |
| Cable Winder Type: |
Single Direction |
| Cable Winder Fits: |
1.5 in. ID Drive Pipe |
| Drive Pipe Dimensions: |
12 ft. 4.5 in. L (1,5 in. ID) |
| Fasteners |
Stainless Steel |
8" Aluminum Cradle Beam w/ Sheave Housings
| Cradle BeamDimensions: |
12 ft. 6 in. L x 6 in. H x 5 in. Flange |
| Cradle Beam Weight: |
78.83 lbs. |
| Cradle Beam Material: |
6061-T6 US aluminum |
| Sheave Housing Measurements: |
6 in. L x 4 in. W x 5 1/2 in. H |
| Sheave Housing Fits: |
5 in. flange (I-beam) |
| Sheave Housing Fasteners: |
316 stainless steel |
| Sheave Housing Accepts: |
4 in. sheave w/ bronze bushing |
| Sheave Bolt Bore: |
3/4 in. |
| Sheave Housing Material: |
6061-T6 US aluminum |
| Sheave Mounting Hex Head Bolts: |
(4) 1/2 in. x 2 1/2 in. stainless steel |
| Sheave Housing Lock Washers: |
(4) 1.2 in. stainless steel |
| Sheave Housing Nuts: |
(4) 1/2 in. stainless steel |
8 in. x 14 ft. Prefabricated Aluminum Cradle Bunk
| Dimensions: |
14 ft. x 8 in. H x 5 in. flange |
| Max Flange Size: |
5 in. Flange |
| Angle: |
19 degrees |
| Weight: |
2.898 lbs. / linear ft. |
| Material: |
Marine-grade 6061-T6 US aluminum |
| Padding: |
Rubber |
| Padding Color: |
Black |
| Shipment: |
Loose Beam / Freight |
4,000 lb. Standard Gear Plate Assembly (Flat-Plate Hoist)
| Rated Capacity: |
4,000 lbs. |
| Tested Capacity: |
Straight line |
| Gear Plate Dimensions: |
2 ft. x 1 ft. |
| Bull Gear Ratio: |
96:1 |
| Back Plate Bearing: |
Bronze Composite |
| 96 Tooth Gear Material: |
Cast Iron |
| Worm Material: |
Hardened Bronze |
| Hoist Pulley Size: |
10 in. |
| Hoist Pulley Material: |
Zinc die-cast |
| Drive Belt Size: |
34 in. |
| Drive Belt Type: |
AX-34 cogged belt |
| Weight: |
34-47 lbs. |
| Warranty: |
Lifetime |
| Manufacturer: |
BH-USA |
Elite 3/4 HP 56 Frame Painted Boat Lift Motor (Flat-Plate Hoist)
| Model #: |
93197 |
Max Run Time: |
15 Minutes |
| Dimensions: |
8 in. x 9 1/2 in. x 6 1/2 in. |
Weight: |
24 lbs. (Motor Only) |
| Catalog #: |
N/A |
SKU: |
60420 |
| Horsepower: |
.75 |
Mounting Type: |
C |
| RPM: |
1725 |
Service Factor: |
1.0 |
| Voltage: |
115/230 |
Phase: |
1 |
| Amps: |
10.8/5.4 |
SFtartA: |
N/A |
| Herz: |
60 |
AMB: |
40 |
| Frame: |
56 |
HSG: |
TENV |
| Code: |
L |
Insulation: |
B |
| Shaft Diameter |
5/8 in. |
A-Drive 40:90 Double Worm Reducer Gearbox (Direct Drive Hoist)
| Type: |
40:90 |
| Actual Ratios: |
450:1 |
| Material: |
Aluminum |
| Grease: |
Special blend |
| Lubrication: |
Permanent |
| Motor Mount: |
C-Face |
| Manufacturer: |
BH-USA |
| Warranty: |
5 Year |
| Motor Input: |
Rotational 360 Degrees |
| Fasteners: |
Stainless Steel |
Elite 1 HP C-Face Stainless Steel Boat Lift Motor (Direct Drive Hoist)
| Model #: |
93048 |
Max Run Time: |
15 Minutes |
| Dimensions: |
9" x 10 1/2" x 6 1/4" |
Weight: |
33 lbs. |
| Catalog #: |
N/A |
SKU: |
N/A |
| Horsepower: |
1 |
Mounting Type: |
C |
| RPM: |
1725 |
Service Factor: |
1.15 |
| Voltage: |
115 / 230 |
Phase: |
1 |
| Amps: |
7.8 |
SFtartA: |
N/A |
| Herz: |
60 |
AMB: |
40c |
| Frame: |
56c |
HSG: |
TENV |
| Code: |
L |
Insulation: |
A |
| Shaft Diameter |
5/8" |
Aluminum Pile Mount Boat Lifts
| Lifting Capacity |
Hoist Type |
Motor Type |
Piling Amount |
Cable Configuration |
Cable Thickness |
Cable Length |
| 6,000 lbs. |
4,000 lb. Standard Gear Plate Assembly - 1/2 in. Thick Aluminum |
Elite 3/4 HP Painted 56 Frame Motor |
4 |
Straight-Line |
5/16 in. |
15 ft. |
| 6,000 lbs. |
A-Drive 40:75 Double Worm Reducer Gearbox |
Elite 3/4 HP Stainless Steel C-Face Motor |
4 |
Straight-Line |
5/16 in. |
15 ft. |
| 8,000 lbs. |
4,000 lb. Standard Gear Plate Assembly - 1/2 in. Thick Aluminum |
Elite 1 HP Painted 56 Frame Motor |
4 |
Straight-Line |
5/16 in. |
15 ft. |
| 8,000 lbs. |
A-Drive 40:75 Double Worm Reducer Gearbox |
Elite 1 HP Stainless Steel C-Face Motor |
4 |
Straight-Line |
5/16 in. |
15 ft. |
| 9,000 lbs. |
4,000 lb. Standard Gear Plate Assembly - 1/2 in. Thick Aluminum |
Elite 1 HP Painted 56 Frame Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 9,000 lbs. |
A-Drive 40:75 Double Worm Reducer Gearbox |
Elite 1 HP Stainless Steel C-Face Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 12,000 lbs. |
4,000 lb. Standard Gear Plate Assembly - 1/2 in. Thick Aluminum |
Elite 3/4 HP Painted 56 Frame Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 12,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 HP Stainless Steel C-Face Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 16,000 lbs. |
6,500 lb. Deluxe Gear Plate Assembly – Galvanized |
Elite 1 HP Painted 56 Frame Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 16,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 HP Stainless Steel C-Face Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 20,000 lbs. |
8,500 lb. Advanced Dual Pulley Gear Plate Assembly – Galvanized |
Elite 1 1/2 HP Painted 56 Frame Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 20,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 1/2 HP Stainless Steel C-Face Motor |
4 |
Compounded |
5/16 in. |
33 ft. |
| 20,000 lbs. |
8,500 lb. Advanced Dual Pulley Gear Plate Assembly - Powdercoated |
Elite 1 1/2 HP Painted 56 Frame Motor |
6 |
Compounded |
3/8 in. |
33 ft. |
| 20,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 1/2 HP Stainless Steel C-Face Motor |
6 |
Compounded |
3/8 in. |
33 ft. |
| 24,000 lbs. |
8,500 lb. Advanced Dual Pulley Gear Plate Assembly - Powdercoated |
Elite 1 1/2 HP Painted 56 Frame Motor |
6 |
Compounded |
3/8 in. |
33 ft. |
| 24,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 1/2 HP Stainless Steel C-Face Motor |
6 |
Compounded |
3/8 in. |
33 ft. |
| 27,000 lbs. |
A-Drive 40:90 Double Worm Reducer Gearbox |
Elite 1 1/2 HP Stainless Steel C-Face Motor |
8 |
Compounded |
3/8 in. |
36 ft. |
Pile mount brackets are included, long bolts to mount the brackets to the pilings are not.
All BH-USA top beams are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. The purchaser must be present during delivery. For more questions, visit our
shipping terms and conditions.
6,000 lbs.-16,000 lbs. Aluminum Four Post Lift Guide
Reviews
0 review for #Meredith & Sons 12K Four Post Pile Mount Boat Lift