Gulf Breeze Aluminum Dual Pipe Support

  • 6061-T6 US aluminum construction
  • Lightweight, no welds, and easy to install
  • Adjustable with different wood joist sizes
  • Designed with using structural beams that run with the slip
  • Accepts 1.5 in. drive pipe
  • Wood joist mounting fasteners not included

$299.99

2 in stock (can be backordered)

About this Item

  • 6061-T6 US aluminum construction
  • Lightweight, no welds, and easy to install
  • Adjustable with different wood joist sizes
  • Designed with using structural beams that run with the slip
  • Accepts 1.5 in. drive pipe
  • Wood joist mounting fasteners not included

Gulf Breeze Aluminum Dual Pipe Support

The Gulf Breeze Aluminum Dual Pipe Support allows for lifting a boat using structural beams that run with the slip, not across the slip. Designed to mount with wood joists. Features all 6061-T6 US aluminum parts and all stainless steel fasteners. No welds. Fully adjustable. Side mount designed boat lift. Includes an aluminum bearing block with a bronze flange bearing to support the drive pipe. It has a 1/4 in. screw-in grease fitting to lubricate the drive pipe. Preferred installation when Joists are running from back to the front of the slip. Accepts 1.5 in. drive pipe.

Designed to fit particular construction methods typically found around the Florida Panhandle Gulf Breeze and Mobile Bay areas. Lightweight, easy to work with, and easy to customize per installation. Supports also include the dead-man bracket if compounding your cables. Each bracket is rated for 3,000 lbs when compounding, when used properly with 4 brackets can create up to a 12,000 lb lift. Made by BH-USA. Does not include wood joist mounting fasteners.

Specifications

Fits Drive Pipe Size: 1.5 in.
Straight Pull Lift Capacity: 1,500 lbs.
Compounded Pull Lift Capacity: 3,000 lbs.
Material: Aluminum
Material Type: 6061 T-6 us
Material Thickness: 1/4 in.
Dimensions: 22 in. L x 11 1/2 in. W x 24 in. H
Distance between Bearings: 19 in.
Bracket Height above Bearing: 14 in.
Wood Joist Mounting Holes: 4 (per flange)
Mounting Hole Size: 3/4 in.
Max. Stinger Width: 5 1/2 in.
Bearing Block Dimension: 4 7/8 in. x 5 3/4 in. x 1 1/2 in.
Housing Material: 6061-T6 US Aluminum
Press In Bushing Type: Bronze
Bushing ID: 1 7/8 in.
Bearing Surface 1 5/8 in.
Mounting Hole 9/16 in.
Grease Fitting Size: 1/4 in.
Fastener Type: Hex head bolts
Fastener Material: Stainless steel
Fastener Size: 1/2 in. x 5 1/2 in.
Hex Head Bolts Included: 2
Fastener Type: Nut
Fastener Material: Stainless steel
Fastener Size: 1/2 in.
Nuts Included: 4
Fastener Type: Lock washer
Fastener Material: Stainless steel
Fastener Size: 1/2 in.
Lock Washers Included: 4
Fastener Type: Tap Bolt
Fastener Material: Stainless steel
Fastener Size: 1/2 in. x 1 3/4 in.
Tap Bolts Included: 2
Do not attempt to use with two short pieces of pipe. Always use the BH-USA overhead lift guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Tech Guides

Overhead Boat Lift Guide

Reviews

0 review for #Gulf Breeze Aluminum Dual Pipe Support

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top