2021 BH-USA Holiday & Shut-Down Schedule

Gulf Breeze 12,000 lb. A-Drive Overhead Boathouse Lift

  • 12,000 lb. lifting capacity
  • 6061-T6 US aluminum construction
  • Lightweight, no welds, and easy to install
  • Uses (2) A-Drive direct-drive hoists
  • (4) 5/16 in. x 33 ft. 7 x 19 aircraft cable
  • Side mount on wood joists

From$4,129.89

Clear Selection and Start Over

About this Item

  • 12,000 lb. lifting capacity
  • 6061-T6 US aluminum construction
  • Lightweight, no welds, and easy to install
  • Uses (2) A-Drive direct-drive hoists
  • (4) 5/16 in. x 33 ft. 7 x 19 aircraft cable
  • Side mount on wood joists

Gulf Breeze 12,000 lb. A-Drive Overhead Boathouse Lift

The Gulf Breeze 12,000 lb. A-Drive Overhead Boathouse Lift allows for lifting a boat using structural beams that run with the slip, not across the slip. 12,000 lb. lifting capacity. Twin lift boat motor drive. Designed to mount with wood joists. Features all 6061-T6 US aluminum parts and all stainless steel fasteners. No welds. Fully adjustable. Side mount designed boat lift. Includes an aluminum bearing block with a bronze flange bearing to support the drive pipe. It has a 1/4 in. screw-in grease fitting to lubricate the drive pipe. Accommodates 3 in. to 8 in. wide beams that are up to 12 inches tall.

Designed to fit particular construction methods typically found around the Florida Panhandle Gulf Breeze and Mobile Bay areas.  Preferred installation when Joists are running from back to the front of the slip. Accepts 1.5 in. drive pipe.

Lightweight, easy to work with, and easy to customize per installation. Supports also include the dead-man bracket if compounding your cables. Each bracket is rated for 3,000 lbs when compounding, when used properly with 4 brackets can create up to a 12,000 lb lift. The mounts drop down each side of the slip and not across the slip like traditional overhead installations. Center console boats, tuna towers, and ski racks have the ability to be lifted. Made by BH-USA. Does not include wood joist mounting fasteners.

Specifications

Fits Drive Pipe Size: 1.5 in.
Drive Pipe Type: Schedule 40
Drive Pipe Finish: Electro-galvanized
Cable Type: 7 x 19 aircraft cable
Cable Thickness: 5/16 in.
Cable Line: 2 part (compounded)
Cable Length: 33 ft.
Cable Quantity: 4
Cable Winder Direction: Single
Cable Winder Type: Split
Cable Winder Quantity: 1
Motor Size: 1 HP
Motor Finish: Stainless steel
Motor Type: C-Face
Motor Quantity: 2
Motor Control Cable Length: 16 ft. & 45 ft.
Straight Pull Lift Capacity: 1,500 lbs.
Compounded Pull Lift Capacity: 3,000 lbs.
Material: Aluminum
Material Type: 6061 T-6 us
Material Thickness: 1/4 in.
Dimensions: 22 in. L x 11 1/2 in. W x 24 in. H
Distance between Bearings: 19 in.
Bracket Height above Bearing: 14 in.
Wood Joist Mounting Holes: 4 (per flange)
Mounting Hole Size: 3/4 in.
Max. Stinger Width: 5 1/2 in.
Bearing Block Dimension: 4 7/8 in. x 5 3/4 in. x 1 1/2 in.
Housing Material: 6061-T6 US Aluminum
Press In Bushing Type: Bronze
Bushing ID: 1 7/8 in.
Bearing Surface 1 5/8 in.
Mounting Hole 9/16 in.
Grease Fitting Size: 1/4 in.
Gearbox Type: Direct drive
Gearbox Weight: 28.35 lbs.
Warranty: 5 years
Gear Type: 40:75 configuration
Actual Ratio: 450:1
Material: Aluminum
Lubrication: Specially blended gear grease
Lubrication Application: Permanently sealed in the gearbox
Motor Flange to Driveshaft Flange Offset: 1.22 in.
Overall Dimensions: 11.16 in. L x 7.21 in. W x 13.23 in. H
Output Shaft Size: 1 1/4 in.
Input Motor Shaft Size: 5/8 in.
Motor Shaft to Drive Pipe Shaft: 6.59 in.
Drive Pipe Mounting Bolt Size: (4) .55 in.
Drive Pipe Bolt Mount Hole to Bolt Mount Hole: 4.59 in.
Driveshaft Gearbox Dimensions: 8.07 in. L x 5.04 in. W x 6.77 H
Motor Mounting Type: C-Face
Motor Mounting Bolt Size: (4) 7/16 in.
Motor Bolt Mount Hole to Bolt Mount Hole: 4.15 in.
Motor Gearbox Dimensions: 4.78 L x 3.94 in. W x 3.37 in. H
3/4 HP Motor A-Drive Output Torque: 3,699 lbs./in.
1 HP Motor A-Drive Output Torque: 4,932 lbs./in.
Factory Model #: 93048
Maximum Run Time: 15 minutes
Motor Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in.
Horsepower: 1 HP
Mounting Type: C
RPM: 1725
Service Factor: 1.15
SFA: 17.5 (115v)
Phase: 1
Amps: 15.6
Herz: 60
AMB: 40°C
Frame: 56C
HSG: TENV
Code: H
Insulation: F
Shaft Diameter: 5/8 in.
Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Max Amps: 20
Max HP: 1 1/2 HP
Compliance: UL, NEMA, CE, SA
VAC: 120-240
Weight: 1.2 lbs.
Box Color: Gray
Handle Color: Red
Switch Type: Maintained (Lock-On)
Housing Material: Plastic
Plug Type: 3-US 110 V Standard
Plug Cord Length: 6 in.
GFCI to Switch Cord Length: 6 ft.
GFCI: 7 in. x 2 1/2 in. x 1 in.
Color: Black
Class: A-Rainproof
Catalog Number: 303385214
AMP: 15
Hz: 60
Watt: 1875
Volt: 125
Reset Type: Automatic
Cord Diameter Range: .28 - .65
Cradle Beam Quantity: 2
Cradle Beam Dimensions: 12 ft. 6 in. L x 8 in. Web x 5 in. Flange
Cradle Beam Weight: 78.83 lbs.
Cradle Beam Material: 6061-T6 US aluminum
Sheave Housing Measurements: 6 in. L x 4 in. W x 5 1/2 in. H
Sheave Housing Fits: 5 in. flange (I-beam)
Sheave Housing Fasteners: 316 stainless steel
Sheave Housing Accepts: 4 in. sheave w/ bronze bushing
Sheave Bolt Bore: 3/4 in.
Sheave Housing Material: 6061-T6 US aluminum
Sheave Mounting Hex Head Bolts: (4) 1/2 in. x 2 1/2 in. stainless steel
Sheave Housing Lock Washers: (4) 1.2 in. stainless steel
Sheave Housing Nuts: (4) 1/2 in. stainless steel
Bunk Material: Aluminum
Bunk Material Style: : 6061-T6 US
Bunk Type: Cradle
Dimensions: 14 ft. x 10 in.
Padding Material: Rubber
Padding Design: Non-marking
Padding Color: Black
Bunk Angle: 19 degrees
8 in. Cradle Bunk Weight: 2.898 lbs. / linear ft.
All BH-USA boat lifts are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. All boat lifts come with 33 ft. cable drops for straight-line boat lifts. You will need to cut the cable to fit your configuration.

Reviews

0 review for #Gulf Breeze 12,000 lb. A-Drive Overhead Boathouse Lift

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top