About this Item
- Made in the USA
- Solid state electronic ballast
- One year warranty
- GFCI protected
- 175 WATT HID U/V emitting bulb
The Green Monster Single Light Kit provides users the benefit of having two light bulbs running off of one control box. Each kit includes (1) 8 in. x 8 in. x 4 in. control box. The box contains (1) photocell and (1) GFCI plug. The GFCI plug powers the one bulb. The bulb leads range from 50 ft. to 15o ft. Works great for those who want multiple lights in multiple locations. The kit includes (1) a waterproof bulb. The bulb illuminates white. Zip tie the enclosed green bag around the waterproof bulb housing to get the green color effect. Replacement bulbs sold separately. It includes two-stage waterproofing. Made by Green Monster Fishing Lights.
8 in. x 8 in. x 4 in. Control Box
GFCI Plug w/ Control Cable
Green Monster Bulbs w/ Cover
1. Locate the small baggy included with your Green Monster Fishing Light. This bag contains all installation parts, (i.e. screws and zip-ties).
2. Locate an area to mount the electronic power unit. This location should be near a GFCI power source. This box converts electricity from your power GFCI protected power source into useable power for the bulb. It is normal for this box to be warm to the touch during operation.
3. Determine bulb depth location. NOTE: minimum depth for the bulb should be at least 4 feet from the surface of the water. This prevents the bulb from being damaged by boat traffic. Once the desired depth is determined, subtract the distance of the bulb location from the water’s surface. This will give you the distance the weight needs to be from the bulb. (Total depth of water – Depth of bulb= Distance between the weight and the bulb)
4. Adjust the weight to the desired depth. Attach the zip-ties to the cord with the cord protector in place. Be sure to tighten the zip-ties and check for slippage.
5. Deploy the weight and bulb in the desired location. Make sure you always deploy the weight FIRST and allow the weight to pull the bulb into the proper location to prevent bulb breakage!!!
6. Once the bulb is in position, plug the PHOTOCELL into the top of the power unit. Next, plug your Green Monster Fishing Light into a GFCI protected outlet. Once night comes, your light will glow bright and beautiful. Note: Although your light comes with its own GFCI plug attached to it, we recommended that the power source also be GFCI protected due to its proximity to water and the outdoors.