About this Item
- On/Off Security Switch
- One-touch automatic Up/Down Switch (Auto-Stop)
- Three Button Hand Held Radio Transmitter (remote control)
- Unit can be wired at 110 or 220V AC
GR1A Single Motor Boat Lift Remote – Auto-Stop System
The GR1A Single Motor Boat Lift Remote – Auto-Stop System is a standard line of controls equipped with a 30 amp control relay. Controls one lift with a single motor. On/Off Security Switch. One-touch automatic Up/Down Switch (Auto-Stop). 110v or 220v AC wiring capabilities. Accommodates optional multiple transmitters for the boat lift remote. The control box features a black water-resistant gasket. Control faceplate has raised buttons for operation and one toggle switch that regulates power to the remote.
Online wiring and troubleshooting guide diagrams for each model. FFC & ETL listed. Compatible with any single-phase electric boat lift motor. Remove the existing drum switch and easily install the remote. Includes diagrams for all known boat lift motors including the Elite Boat Lift Motor.
Auto-stop systems allow you to raise or lower your lift to a specific position at the touch of a button. Requires the installation of one of four “limit switches”. The limit switch you need depends on the type of motor(s) that you are using on the boat lift. Without auto-stop capability, you will have to hold the button down to start and stop the boat lift movement.
The 3-Button Transmitter is sold with Gem Remote systems since March 2007. Water-resistant and floats. The transmitter works on radio frequency not the line of sight. Operates up to 300 feet away from the control box. Frequency 372. 2.8 in. x 1.8 in. remote dimensions. Includes (2) 3V batteries (CR2032). Will not work with units pre March 2007.