Flat Plate Hoist Hanger for Steel Beams

  • Mounts to steel beams, i-beams, or channel
  • Hot-dipped galvanized steel
  • Completely adjustable on standard steel beams
  • Fits 2″ ID / 2 3/8 in. OD drive pipes
  • Fasteners included

From$191.99

Clear Selection and Start Over

About this Item

  • Mounts to steel beams, i-beams, or channel
  • Hot-dipped galvanized steel
  • Completely adjustable on standard steel beams
  • Fits 2″ ID / 2 3/8 in. OD drive pipes
  • Fasteners included

Flat Plate Hoist Hanger for Steel Beams

The Flat Plate Hoist Hanger for Steel Beams features an adjustable frame with built-in drive pipe support sleeves. The hanger clamps onto the steel beam, I-beam, or channel. Designed for center or side mounting. Must use with accompanying steel mounting pipe support. Hot-dipped galvanized steel. Cable winders will fit in between the drive pipe support sleeves. Sleeves fit 2 in. ID / 2 3/8 in. OD drive pipe. Made by BH-USA. No welding or drilling required. Fasteners included.

Specifications

Weight: 41 lbs.
Material:  Hot Dipped Galvanized Steel
Drive Pipe Sleeve Accepts: 2 in. ID / 2 3/8 in. OD Drive Pipe
Fasteners: Included
Dimensions: 27 1/8 in. x  13 1/2 in. x 7 1/4 in.
Center-mount pipe supports are only recommended for center mount or twin mount installations, never use a center mount pipe support on a side mount installation. Never attempt to straight-line lift any more than 4500 lbs on a side mount overhead lift or straight line more than 6000 lbs on center or twin mount lifts. Only use the full length of the pipe to connect both pipe supports. Do not attempt to use two short pieces of the drive pipe. If designing or engineering your own overhead lift you must download and read the BH-USA overhead lift guide that can be found on this page and in the tech guide section. BH-USA makes available complete engineered and rated lifts and highly encourages choosing this option over designing and engineering a lift on your own. The above ratings of the dual pipe supports are only valid if installing or using the pipe supports in accordance with the BH-USA overhead lift guide. The Side Mount and Twin Mount ratings are based on straight line pull, by compounding the cable you will increase the rating. Rating is based PR pipe support and not pr lift. When considering the weight of your boat you must use full wet weight plus the weight of cradle .

Tech Guides

Overhead Boat Lift Guide

Reviews

0 review for #Flat Plate Hoist Hanger for Steel Beams

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top