Coastal Series Overhead V-Hull Boat Lift

  • All 6061-T6 US aluminum construction
  • Swaged stainless steel 7 x 19 aircraft cable w/ fasteners
  • Full boat lift ready to be installed
  • A-Drive direct-drive belt-free boat hoist
  • Aluminum black rubber on top of the aluminum bunks
  • 4,000 lb. & 8,000 lb. styles
  • No weld design, fully adjustable
  • Made in USA

From$5,294.30

Clear Selection and Start Over

About this Item

  • All 6061-T6 US aluminum construction
  • Swaged stainless steel 7 x 19 aircraft cable w/ fasteners
  • Full boat lift ready to be installed
  • A-Drive direct-drive belt-free boat hoist
  • Aluminum black rubber on top of the aluminum bunks
  • 4,000 lb. & 8,000 lb. styles
  • No weld design, fully adjustable
  • Made in USA

Coastal Series Overhead V-Hull Boat Lift

The Coastal Series Overhead V-Hull Boat Lift is designed to be installed in boathouses. Features a side-mounted drive pipe and boat hoist. Features all marine-grade 6061-T6 US aluminum construction. Includes the A-Drive series direct-drive boat hoist system. All moving parts have grease fittings. Boat hoist lift capacity varies from the 4,000 lb. and 8,000 lb. configurations. No-weld design. A fully adjustable design. Allows the top beams and cradle beams to be field cut for any size boathouse. Includes stainless steel fasteners. Complete boathouse-style boat lift ready to install.

Includes a dual voltage, standard duty single-phase electric motor with a start capacitor. Stainless steel finish. Features the standard direct drive mounting hole pattern. Includes aluminum end bells. Double-shielded ball bearings. Dynamically balanced rotors. 5/8 in. motor shaft. Made by Coastal Series.

Includes

(1) A-Drive boat hoist (Double worm reducer gearbox & c-face motor)
(2)  12 1/2 ft. aluminum cradle beams (cut to the desired size)
(2) 12 ft. L x 10 ft. H  Aluminum bunks
(4) Guidepost stanchions
(1) Swaged loop 7 x 19 aircraft cable w/ fasteners
(4) Black guidepost bumpers
(1) Aluminum bunk mounting kit
(2) 2 3/8 in. OD / 2 in. ID boathouse style cable winders
(1) Aluminum dual-pipe support
(1) 2 3/8 in. OD / 2 in. ID boat lift drive pipe

Specifications

Lift Capacity: 4,000 lbs. 8,000 lbs.
SKU #: 15005 15000
Top Beam Length: 12 1/2 ft. 12 1/2 ft.
Top Beam Web: 6 in. 6 in.
Top Beam Flange: 4 in. 4 in.
Web Thickness: .210 in. .210 in.
Flange Thickness: .350 in. .350 in.
Beam Wt/Lin ft.: 4.7 lbs. 4.7 lbs.
Top Beam Material: 6061-T6 US aluminum 6061-T6 US aluminum
Material Type: Extruded Extruded
Drive Pipe Size: 2 3/8 in. OD / 2 in. ID 2 3/8 in. OD / 2 in. ID
Drive Pipe Length: 13 ft. 13 ft.
Drive Pipe Finish: Electro-galvanized Electro-galvanized
Cable Type: 7 x 19 aircraft cable 7 x 19 aircraft cable
Cable Thickness: 1/4 in. 5/16 in.
Cable Length: 60 ft. 100 ft.
Cable Material: Stainless steel Stainless steel
Cable Configuration: 1 part single 2 part compounded
Cradle Beams Matierlal: 6061-T6 US aluminum 6061-T6 US aluminum
Cradle Beam Dimensions: 12 1/2 ft. L x 6 in. Web x 4 in. Flange 12 1/2 ft. L x 6 in. Web x 4 in. Flange
Cradle Beam Wt/Lin ft.: 4.7 lbs. 4.7 lbs.
Bunk Material: Aluminum Aluminum
Bunk Material Style: 6061-T6 US 6061-T6 US
Bunk Type: Cradle Cradle
Length: 12 ft. 12 ft.
Padding Material: Rubber Rubber
Padding Design: Non-marking Non-marking
Padding Color: Black Black
Bunk Height: 10 in. (6 in. Flange) 10 in. (6 in. Flange)
Bunk Angle: 19 degrees 19 degrees
10 in. Cradle Bunk Weight: 3,759 lbs. / linear ft. 3,759 lbs. / linear ft.
Gearbox Type: Direct drive Direct drive
Gearbox Weight: 28.35 lbs. 38.3 lbs.
Warranty: 5 years 5 years
Gear Type: 40:75 configuration 40:90 configuration
Actual Ratio: 450:1 450:1
Material: Aluminum Aluminum
Lubrication: Specially blended gear grease Specially blended gear grease
Lubrication Application: Permanently sealed in the gearbox Permanently sealed in the gearbox
Motor Flange to Driveshaft Flange Offset: 1.22 in. 1.22 in.
Overall Dimensions: 11.16 in. L x 7.21 in. W x 13.23 in. H 11.16 in. L x 7.21 in. W x 13.23 in. H
Output Shaft Size: 1 1/4 in. 1 1/4 in.
Input Motor Shaft Size: 5/8 in. 5/8 in.
Motor Shaft to Drive Pipe Shaft: 6.59 in. 6.59 in.
Drive Pipe Mounting Bolt Size: (4) .55 in. (4) .55 in.
Drive Pipe Bolt Mount Hole to Bolt Mount Hole: 4.59 in. 4.59 in.
Driveshaft Gearbox Dimensions: 8.07 in. L x 5.04 in. W x 6.77 H 8.07 in. L x 5.04 in. W x 6.77 H
Motor Mounting Type: C-Face C-Face
Motor Mounting Bolt Size: (4) 7/16 in. (4) 7/16 in.
Motor Bolt Mount Hole to Bolt Mount Hole: 4.15 in. 4.15 in.
Motor Gearbox Dimensions: 4.78 L x 3.94 in. W x 3.37 in. H 4.78 L x 3.94 in. W x 3.37 in. H
1 HP Motor A-Drive Output Torque: 4,932 lbs./in. X
1 1/2 HP Motor A-Drive Output Torque: X 7,399 lbs./in.
Motor Brand: Elite Elite
Factory Model #: 93048 93048
Maximum Run Time: 15 minutes 15 minutes
Motor Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in. 9 in. x 10 1/2 in. x 6 1/4 in.
Weight: 29 lbs. 39.65 lbs.
Horsepower: 1 HP 1 1/2 HP
Mounting Type: C C
RPM: 1725 1725
Service Factor: 1.15 1.15
SFA: 17.5 (115v) 8.8 (220v)
Phase: 1 1
Amps: 15.6 (115v) 7.7 (220v)
Herz: 60 60
AMB: 40°C 40°C
Frame: 56C 56C
HSG: TENV TENV
Code: H E
Insulation: F F
Shaft Diameter: 5/8 in. 5/8 in.
Drum Switch Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in. 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Max Amps: 20 20
Max HP: 1 1/2 HP 1 1/2 HP
Compliance: UL, NEMA, CE, SA UL, NEMA, CE, SA
VAC: 120 120
Weight: 1.2 lbs. 1.2 lbs.
Box Color: Gray Gray
Handle Color: Red Red
Switch Type: Maintained (Lock-On) Maintained (Lock-On)
Housing Material: Plastic Plastic
Plug Type 3-US 110 V Standard US 240 Volt NEMA 6-15
Control Cable Size: 14/5 SJTW 14/5 SJTW
Drum Switch Cable to GFCI Plug: 60 in. 60 in.
GFCI to Plug: 4 1/2 in. 4 1/2 in.
GFCI 7 in. x 2 1/2 in. x 1 in. 7 in. x 2 1/2 in. x 1 in.
Color Black Black
Class A-Rainproof A-Rainproof
Catalog Number 303385214 25090
AMP 15 15
Hz 60 50/60
Watt 1875 3600
Volt 125 240
Reset Type Automatic Automatic
Cord Diameter Range .28 - .65 .28 - .65
Lift Speed: Close to 4'/Min (Tested: 24" in 31 Seconds) Approx. 2'/Min (Tested: 24" in 62 Seconds)
Guidepost Height: 60 in. 60 in.
Guidepost Bumper Size: 48 in. 48 in.
Guidepost Bumper Type: Split Split
Guidepost Bumper Color: Black Black
Shipping Type: Freight Freight
Packaging: 13 1/2 ft. x 2 ft. x 2 ft. wood crate 13 1/2 ft. x 2 ft. x 2 ft. wood crate
All BH-USA boat lifts are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. All boat lifts come with 33 ft. cable drops for straight-line boat lifts. You will need to cut the cable to fit your configuration.

Tech Guides

Costal Series 4,000 lbs.-8,000 lbs. Side Mount Lift Guide

Reviews

0 review for #Coastal Series Overhead V-Hull Boat Lift

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top