Coastal Series Direct Drive PWC Skiff Lift

1 review
  • 1500 lb. Lift Capacity
  • Rotates 180 Degrees
  • 102 in. Travel
  • Powered by Beltless Direct Drive
  • Stainless Steel Motor & Hardware
  • 3 ft. per Minute Travel Speed
  • Salt Water Proficient

$3,999.99

About this Item

  • 1500 lb. Lift Capacity
  • Rotates 180 Degrees
  • 102 in. Travel
  • Powered by Beltless Direct Drive
  • Stainless Steel Motor & Hardware
  • 3 ft. per Minute Travel Speed
  • Salt Water Proficient

Coastal Series Direct Drive PWC Skiff Lift

The Coastal Series Direct-Drive PWC Skiff Lift comes complete with hoists, cable, fasteners, main housing, bunks, and guides. Designed as the only PWC Skiff pile mount boat lift on the market that stays completely out of the water when it is raised.

Features all-aluminum construction and stainless steel fasteners. Rotates 180 degrees while in the air. Bringing the PWC or skiff boats fully out of the water allows for easier maintenance and storage. It travels 3 ft. per minute when raising and lowering the lift. It has 8 1/2 ft. (102 in.) of travel area. 1,500 lb. lifting capacity. Fits up to 7 ft. wide jet skis or skiff boats. Maintenance-free design. Easy to install. Mounts to pre-existing dock pilings.

Part Identification

Item No. Quantity Description
1 1 Piling mounts
2 5 .812 ID x 1.469 OD x .125 THK Lubricant-filled nylon washer
3 1 Mast
4 2 Lift arm
5 1 1/2 in. x 2 in. 13 thread stainless steel hex head bolts
6 7 1/2 in. stainless steel washers
7 4 1/2 in. x 6 in. 13 thread stainless steel hex head bolts
8 4 1/2 in. stainless steel lock washer
9 1 Swing stop pin assembly
10 2 Aluminum guidepost stanchions
11 2 PVC guideposts
12 2 Guidepost bumpers
13 1 5/8 in. x 6 in. 11 thread stainless steel hex head bolts
14 1 Cable roller
15 2 Cradle bunk beam
16 1 1 HP wired boat lift motor
17 1 Lift housing assembly
18 1 1/4 in. stainless steel cable w/ swaged loop
19 4 1/2 in. stainless steel nut
20 4 5/8 in. nyloc nut
21 1 Roller housing assembly
22 1 1/2 in. stainless steel nyloc nut
23 8 Aluminum bunk mount angle bracket
24 3 5/8 in. x 5 in. 11 thread stainless steel hex cap screw
25 3 5/8 in. type A stainless steel flat washer
26 16 1/2 in. x 3 1/2 in. 13 thread stainless steel hex cap screw
27 16 1/2 in. stainless steel washer
28 16 1/2 in. stainless steel Nuts

Specifications

Lift Rating: 1,500 lbs.
Lift Speed: 3 ft. / minute (1 HP Motor)
Travel Distance: 102 in.
Hoist Type: Direct Drive System
Hoist Brand: BH-USA A-Drive Series
Motor Type: Electric
Motor Brand: Elite Motors
Motor Size: 1 HP
Motor Style: C-Face
Mounting Style: Pile Mounting
Piling Recommendation: 10 in. Diameter
Minimum Above Dock Size: 42 in.
Material: Aluminum
Material Type: 6061-T6 US
Fasteners: 316 Stainless Steel
Voltage: 110 Volts
Amps: 16 AMPS
Mast Height: 14 ft. (168 in.)
Rotation: 180 Degrees
Cradle Bunks: Treated Wood
Cradle Bunk Finish: Marine Grade Black Carpet
Cradle Bunk Size: 96 in. L x 2 in. W x 8 in. H
Cable Material: 316 Stainless Steel
Cable Type: 7 x 19 Aircraft Cable
Cable Thickness: 1/4 in.
Cable Length: 23 ft.
Cable Style: Swaged
Guidepost Bumpers: 2
Guidepost Bumper Size: 48 in.
Guidepost Bumper Style: Split
Guidepost Bumper Securement: Velcro
Guidepost Bumper Installation: Slides over PVC Guidepost
Guidepost Size: 60 in. L x 2 in. W x 2 in. H
Guidepost Material: PVC
Guidepost Color: White
Guidepost Type: Capped
Drum Switch: Momentary (Spring)
Drum Switch Mounting: Mounting Plate Included
Worm Reducer Size: Single
Gear Ratio: 1:100
Gearbox Material: Aluminum
Drive Pipe Output Shaft: 2 3/8" OD (2" ID)
Motor Output Shaft: 1.125 in.
Lubrication Type: Specially blended
Bearings: Bronze
Spool Dimensions: 5 in. x 5 1/8 in.
Travel Speed:: 4 1/2 ft. / minute (1 HP electric motor)
Spool Holds: 112 in. (1/4 in. cable)
Mounting Holes: 3
Mounting Hole Size: 1/2 in.
Mounting Pattern: Triangle
Mounting Slots: 2
Slot Size: 1 1/16 in. x 9/16 in.
Mounting Holes: 1
Round Size: 9/16 in. x 9/16 in.
Motor Mounting Style: C-Face (direct Input)
Cable Size: Up to 1/4 in. thick
Cable Type: 7 x 19 aircraft cable
Hoist Speed: 40% faster than belt-driven
Model #: 93048
Max Run Time: 15 Minutes
Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in.
Weight: 33 lbs.
Horsepower: 1
Mounting Type: C
RPM: 1725
Service Factor: 1.15
Voltage: 115 / 230
Phase: 1
Amps: 7.8
SFtartA: N/A
Herz: 60
AMB: 40c
Frame: 56c
HSG: TENV
Code: L
Insulation: A
Shaft Diameter 5/8"
Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Max Amps: 20
Max HP: 1 1/2 HP
Compliance: UL, NEMA, CE, SA
VAC: 120-240
Weight: 1.2 lbs.
Box Color: Gray
Handle Color: Red
Switch Type: Varies
Housing Material: Plastic
Plug Type 3-US 110 V Standard
Plug Cord Length 6 in.
GFCI to Switch Cord Length 6 ft.
GFCI 7 in. x 2 1/2 in. x 1 in.
Color Black
Class A-Rainproof
Catalog Number 303385214
AMP 15
Hz 60
Watt 1875
Volt 125
Reset Type Automatic
Cord Diameter Range .28 - .65

Tech Guides

Coastal Series 1500 lbs. PWC/Skiff Lift Guide

Reviews

1 review for Coastal Series Direct Drive PWC Skiff Lift

Rated 5 Out of 5

5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

  1. Have waited for up to 3 weeks from other suppliers! BH keeps them in stock.

    D Meredith

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top