About this Item
- PWC Hoist Cover
- 26 ft. Stainless Steel Cable
- Fasteners Included
The BH-360 Saltwater Belt Driven PWC Lift Cover & Cable Kit is a complete kit. It includes 26 ft. of stainless steel cable, PWC belt-drive hoist cover, mounting fasteners. The kit only fits the BH-360 Saltwater Belt Driven PWC Lift. Made by BH-USA. Designed for saltwater use only.
(1) #36433 – PWC Belt Driven Hoist Cover
(4) #82115FA – #8 Zinc Washers
(4) #70115 – 3/16″ Malleable Stainless Steel Wire Rope Clips
(1) #36474 – 26 ft. 1/4″ Stainless Steel Boat Lift Cable
(4) #82057FA – #8 Pan Head 1/2″ Hoist Cover Screws
BH-USA recommends 7 x 19 aircraft cables for boat lift applications. 7 x 19 means the rope has seven strands and there are nineteen wires in each strand. Always consider at least a 5:1 safety factor when figuring working loads. A test certificate for all cables sold by BH-USA is available upon request.
7 x 19 aircraft cable is not suitable for use in aircraft controls.
Aircraft cable is specified by the number of strands in the rope times the number of wires in each strand. “7 x 19” means the rope has seven (7) strands, with 19 wires in each strand. 7×19 is the most flexible aircraft cable construction.
How much will my cable hold?
The drop is the individual piece of cable from the boat lift to the sling or cradle. Boat lifts have a minimum of 4 drops straight line and 8 drops compounded. The cable must be 7 x 19 aircraft-grade and less than 2 years old. These ratings drop after 2 years and all cables should be replaced after 2 years. What size boat lift cable do I need to lift my boat? Any boat heavier than 6,000 lbs. needs the boat lift cable to be compounded. We use the ASME (American Society for Mechanical Engineers) recommended safety factor and rating system, which is the same used in the overhead crane industry. Never use “Breaking Strength” for rating a cable.
What size boat lift cable do I need to lift my boat?
|Boat Weight||Cable Size||Cable Configuration|
|2,800 lbs.||3/16 in.||Straight Line|
|4,500 lbs.||1/4 in.||Straight Line|
|6,000 lbs.||5/16 in.||Straight Line|
|6,000 lbs.||1/4 in.||Compounded|
|9,000 lbs.||1/4 in.||Compounded|
|10,000 lbs.||1/4 in.||Compounded|
|13,000 lbs.||5/16 in.||Compounded|
|16,000 lbs.||3/8 in.||Compounded|
Any boat heavier than 6,000 lbs. needs the boat lift cable to be compounded. We use the ASME (American Society for Mechanical Engineers) recommended safety factor and rating system, which is the same used in the overhead crane industry. Never use “Breaking Strength” for rating a cable.