Important Information About BH-USA Operations & Ordering during the Coronavirus Pandemic

BH-360 PWC Lift Kit (No Ride Pipe)

  • Does not include ride pipe
  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, and bunks
  • Made in the USA

From$2,241.00

Clear Selection and Start Over

About this Item

  • Does not include ride pipe
  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, and bunks
  • Made in the USA

BH-360 PWC Lift Kit (No Ride Pipe)

The BH-360 PWC Lift Kit (No Ride Pipe) is a complete assembly that does not include the ride pipe. Includes main housing, gearbox, electric motor, and guidepost kits. 1,250 lb. straight-line lifting capacity. Features 360 degrees fully rotational. Freshwater kits have galvanized zinc-coated fasteners. Saltwater kits use stainless steel fasteners. Ships on pallet freight. Made by BH-USA. Ripe Pipe not included.

Freshwater Belt Driven Hoist Includes:

#15201 – BH-360 PWC Lift Main Housing – Freshwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#EM07228 – Elite 3/4 HP Painted PWC Motor
#BH04779 – 1,500 lb. Belt Driven PWC Hoist Gearbox
#21200 – BH-360 Freshwater Belt Driven PWC Lift Cover & Cable Kit

Freshwater Direct Drive Hoist Includes:

#15201 – BH-360 PWC Lift Main Housing – Freshwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#93093-6 -Elite 1 HP Stainless Steel C-Face PWC Lift Motor
#61404 – 1,500 lb. A-Drive Direct Drive PWC Hoist Gearbox
#BH09008 – 1/4 in. x 26 ft. Galvanized Steel PWC Lift Cable w/ Swaged Loop

Saltwater Belt Driven Hoist Includes:

#15202 – BH-360 PWC Lift Main Housing – Saltwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#EM07228 – Elite 3/4 HP Painted PWC Motor
#BH04779 – 1,500 lb. Belt Driven PWC Hoist Gearbox
#21201 – BH-360 Saltwater Belt Driven PWC Lift Cover & Cable Kit

Freshwater vs. Saltwater

Freshwater PWC lifts come with galvanized fasteners for the housing rollers. Saltwater PWC lifts come with stainless steel fasteners for the housing rollers.

Specifications

BH-360 A-Drive Direct Drive PWC Lift

PWC Lift Capacity: 1,250 lbs.
Hoist Capacity: 1,500 lbs.
PWC Lift Speed: Up to 4 ft. / minute (1 HP Motor)
PWC Main Housing Dimensions: 32 in. L x 36 in. W x 6 3/8 in. H
Bunk Mounting Frame: 36 in. L x 50 1/2 in. W
Main Housing Rollers: 4
Cradle Bunks: 2
Cradle Bunk Covering: Marine Carpet
Cradle Bunk Material: Wood
Cradle Bunk Width: Fully adjustable
Pile Mount Plate Dimensions: 18 1/2 in. L x 4 1/2 in. W x 1 1/2 in. H
Dock Mount Plate Dimensions: 24 in. x 3 in. x 7 in.
Hoist Type: Direct Drive System
Hoist Designation: BH-USA A-Drive
Motor Brand: Elite Motors
Motor Size: 1 HP
Motor Type: C-Face
Motor Finish: Stainless Steel
Voltage: 120 Volts
Amps: 20 AMP Circuit
Cable Type: 7 x 19 Aircraft Cable
Cable Thickness: 1/4 in. (Compounded)
Freshwater Cable Type: Galvanized
Saltwater Cable Type: 316 Stainless Steel
Freshwater Fasteners: Galvanized Zinc-Plated
Saltwater Fasteners: 316 Stainless Steel
Shipping Method: Freight
Shipping Type: (1) Pallet / (1) Loose Ride Pipe

Single Worm Reducer Gearbox

Worm Reducer Size: Single
Gear Ratio: 1:100
Gearbox Material: Aluminum
Drive Pipe Output Shaft: 2 3/8" OD (2" ID)
Motor Output Shaft: 1.125 in.
Lubrication Type: Specially blended
Bearings: Bronze
Spool Dimensions: 5 in. x 5 1/8 in.
Travel Speed:: 4 1/2 ft. / minute (1 HP electric motor)
Spool Holds: 112 in. (1/4 in. cable)
Mounting Holes: 3
Mounting Hole Size: 1/2 in.
Mounting Pattern: Triangle
Mounting Slots: 2
Slot Size: 1 1/16 in. x 9/16 in.
Mounting Holes: 1
Round Size: 9/16 in. x 9/16 in.
Motor Mounting Style: C-Face (direct Input)
Cable Size: Up to 1/4 in. thick
Cable Type: 7 x 19 aircraft cable
Hoist Speed: 40% faster than belt-driven

1 HP Stainless Steel Electric Motor

Model #: 93048 Max Run Time: 15 Minutes
Dimensions: 9" x 10 1/2" x 6 1/4" Weight: 33 lbs.
Catalog #: N/A SKU: N/A
Horsepower: 1 Mounting Type: C
RPM: 1725 Service Factor: 1.15
Voltage: 115 / 230 Phase: 1
Amps: 7.8 SFtartA: N/A
Herz: 60 AMB: 40c
Frame: 56c HSG: TENV
Code: L Insulation: A
Shaft Diameter 5/8"

BH-360 Belt-Driven PWC Lift

PWC Lift Capacity: 1,250 lbs.
Hoist Capacity: 1,500 lbs.
PWC Lift Speed: Up to 2 ft. / minute (3/4 HP Motor)
PWC Main Housing Dimensions: 32 in. L x 36 in. W x 6 3/8 in. H
Bunk Mounting Frame: 36 in. L x 50 1/2 in. W
Main Housing Rollers: 4
Cradle Bunks: 2
Cradle Bunk Covering: Marine Carpet
Cradle Bunk Material: Wood
Cradle Bunk Width: Fully adjustable
Pile Mount Plate Dimensions: 18 1/2 in. L x 4 1/2 in. W x 1 1/2 in. H
Dock Mount Plate Dimensions: 24 in. x 3 in. x 7 in.
Hoist Type: Belt Driven System
Motor Brand: Elite Motors
Motor Size: 3/4 HP
Motor Type: 56 Frame (Clawfoot)
Motor Finish: Painted (Black)
Voltage: 120 Volts
Amps: 20 AMP Circuit
Cable Type: 7 x 19 Aircraft Cable
Cable Thickness: 1/4 in. (Compounded)
Freshwater Cable Type: Galvanized
Saltwater Cable Type: 316 Stainless Steel
Freshwater Fasteners: Galvanized Zinc-Plated
Saltwater Fasteners: 316 Stainless Steel
Shipping Method: Freight
Shipping Type: (1) Pallet / (1) Loose Ride Pipe

1,500 lb. Belt Driven PWC Hoist Gearbox

Gearbox Dimensions: 7 in. x 8 1/2 in. x 9 1/2 in.
Gearbox Weight: 28 lbs.
Spool Drum Size: 1 1/2 in. (dia.) x 3 11/15 in.
Worm Material: Hardened Bronze
Worm Thread: Single
Worm Bore: 3/4 in.
Worm Keystock Groove: 3/16 in.
Gear Material: Cast Iron
Gear Ratio: 48:1
Gear Size: 6 in.
Gear Tooth Size: 48
Winch Mount Pattern: 3 hole
Motor Mounting Pattern: 56 frame (clawfoot)
Hoist Pulley Size: 7 in.
Hoist Pulley Material: Die-cast
Hoist Pulley Belt Width: 3/4 in.
Hoist Pulley Keystock Groove: 3/4 in.
Drive Belt Size: 26 in.
Drive Belt Type: Cogged
Collar Size: 3/4 in.
Collar Set Screw Size: 5/16 in.
Fastener Material: Stainless Steel
Fastener Bolt Type: Hex Head
Grease Fittings Size: 1/4 in.
Manufacturer: BH-USA

3/4 HP Electric Motor

Model #: 93197 Max Run Time: 15 Minutes
Dimensions: 9" x 11" x 6" Weight: 26.3 lbs.
Catalog #: N/A SKU #: N/A
Horsepower: .75 Mounting Type: 56
RPM: 1725 Service Factor: 1
Voltage: 115/230 Phase: 1
Amps: 11.4 (110) / 5.6 (220) SFtartA: 12.4 (110) / 6.2 (220)
Herz: 60 AMB: 40c
Frame: 56 HSG: TENV
Code: K Insulation: B
Shaft Diameter 5/8"

Momentary Drum Switch

Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Max Amps: 20
Max HP: 1 1/2 HP
Compliance: UL, NEMA, CE, SA
VAC: 120-240
Weight: 1.2 lbs.
Box Color: Gray
Handle Color: Red
Switch Type: Varies
Housing Material: Plastic

GFCI In-Line Wire Harness

Plug Type 3-US 110 V Standard
Plug Cord Length 6 in.
GFCI to Switch Cord Length 6 ft.
GFCI 7 in. x 2 1/2 in. x 1 in.
Color Black
Class A-Rainproof
Catalog Number 303385214
AMP 15
Hz 60
Watt 1875
Volt 125
Reset Type Automatic
Cord Diameter Range .28 - .65
Warranty 30 Days
The BH-360 PWC Lift should only be used to lift personal watercraft up to 1,250 lbs. Do not alter configuration in any way to lift wider boats. Never ride and lift during the lifting or lowering process. BH-USA does not build lifts for lifting people. You are required to install the BH-360 as instructed by the BH-360 lift guide. Ride pie should penetrate the clay bottom at least 18 in. Use pile mount with dock mount. Extra pile mounts are available for purchase. Never attempt to operate any boat lift with an extension cord or a generator. Mount the drum switch in a location that cannot be reached from the personal watercraft.

Tech Guides

BH-360 PWC Lift Guide
BH-USA Equipment Guide

Reviews

0 review for #BH-360 PWC Lift Kit (No Ride Pipe)

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top