BH-360 Belt Driven PWC Lift

11 reviews
  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Features a 3/4 HP painted 56 frame electric motor
  • Double worm gear reducer  with 48:1 gear ratio
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, bunks, and ride pipe
  • Made in the USA


Clear Selection and Start Over
SKU: N/A Categories: , ,

About this Item

  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Features a 3/4 HP painted 56 frame electric motor
  • Double worm gear reducer  with 48:1 gear ratio
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, bunks, and ride pipe
  • Made in the USA

BH-360 Belt Driven PWC Lift

The BH-360 Belt Driven PWC Lift is a small watercraft boat lift. Rotates 360 degrees when raised out of the water. 1,250 straight-line lifting capacity. Most components made from hot-dipped galvanized steel. Includes 3/4 HP painted 56 frame electric motor, belt-driven gearbox, guidepost kits, bunks, cable, and ride pipe. The lift mounts to the top of the dock. The ride pipe mounts, at the very least, 18 in. below the ground. Includes 26 ft. x 1/4 in. 7 x 19 aircraft cable with swaged loop. The type of cable depends on the version of the PWC lift you select. Freshwater has galvanized zinc-coated fasteners and cable. Saltwater has stainless steel fasteners and cable. Easily mounts under boathouse, canopies, or open-air docks. Made by BH-USA.

Freshwater Package

#15201 – BH-360 PWC Lift Main Housing – Freshwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#EM07228 – Elite 3/4 HP Painted PWC Motor
#BH04779 – 1,500 lb. Belt Driven PWC Hoist Gearbox
#21200 – BH-360 Freshwater Belt Driven PWC Lift Cover & Cable Kit
BH-360 PWC Lift Ride Pipe

Freight Shipping Policy

Questions about shipping? Review our shipping policy.


Lift Capacity: 1,250 lbs.
Cable Configuration: Straight Line
Lift Speed: Up to 2 ft. / Minute (3/4 HP Motor)
Ride Pipe Dimensions: 6 ft. - 12 ft.
Ride Pipe Measurements: Top of the deck to the bottom of the water
Ride Pipe (above dock): 32 in.
Min. Bottom Penetration: 18 in.
PWC Main Housing Dimensions: 32 in. L x 36 in. W x 6 3/8 in. H
Bunk Mount Frame Dimensions: 36 in. L x 50 1/2 in. W
Main Housing Roller Amount: 4
Cradle Bunks Included: 2
Cradle Bunk Type: Wood
Cradle Bunk Cover: Marine-grade carpet
Cradle Bunk Cover Color: Black
Cradle Bunk Width: Adjustable
Pile Mount Plate Dimensions: 18 1/2 in. L x 4 1/2 in. W x 1 1/2 in. H
Dock Mount Plate Dimensions: 24 in. x 3 in. x 7 in.
Hoist Type: Belt Driven System
Gearbox Dimensions: 7 in. x 8 1/2 in. x 9 1/2 in.
Gearbox Weight: 28 lbs.
Spool Drum Size: 1 1/2 in. (dia.) x 3 11/15 in.
Worm Material: Hardened Bronze
Worm Thread: Single
Worm Bore: 3/4 in.
Worm Keystock Groove: 3/16 in.
Gear Material: Cast Iron
Gear Ratio: 48:1
Gear Size: 6 in.
Gear Tooth Size: 48
Winch Mount Pattern: 3 hole
Motor Mounting Pattern: 56 frame (clawfoot)
Hoist Pulley Size: 7 in.
Hoist Pulley Material: Die-cast
Hoist Pulley Belt Width: 3/4 in.
Hoist Pulley Keystock Groove: 3/4 in.
Drive Belt Size: 26 in.
Drive Belt Type: Cogged
Collar Size: 3/4 in.
Collar Set Screw Size: 5/16 in.
Fastener Material: Stainless Steel
Fastener Bolt Type: Hex Head
Grease Fittings Size: 1/4 in.
Motor Size: 3/4 HP
Motor Brand: Elite Motors
Motor Type: 56 Frame (Clawfoot)
Motor Finish: Painted
Motor Color: Black
Motor Voltage: 120v
Motor Amps: 20 AMP circuit
Model #: 93197
Max Run Time: 15 Minutes
Dimensions: 9 in. x 11 in. x 6 in.
Weight: 26.3 lbs.
Horsepower: .75
Mounting Type: 56
RPM: 1725
Service Factor: 1
Voltage: 115/230
Phase: 1
Amps: 11.4 (110) / 5.6 (220)
SFtartA: 12.4 (110) / 6.2 (220)
Herz: 60
AMB: 40c
Frame: 56
Code: K
Insulation: B
Shaft Diameter 5/8"
Drum Switch Type: Momentary
Drum Switch Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Drum Switch Max Amps: 20
Drum Switch Max HP: 1 1/2 HP
Drum Switch Compliance: UL, NEMA, CE, SA
Drum Switch VAC: 120-240
Drum Switch Weight: 1.2 lbs.
Drum Switch Box Color: Gray
Drum Switch Handle Color: Red
Drum Switch Type: Varies
Housing Material: Plastic
GFCI Plug Type: 3-US 110 V Standard
Plug Cord Length: 6 in.
GFCI to Switch Cord Length: 6 ft.
GFCI Dimensions: 7 in. x 2 1/2 in. x 1 in.
GFCI Color: Black
GFCI Class: A-Rainproof
GFCI Catalog Number: 303385214
GFCI Hz: 60
GFCI Watt: 1875
GFCI Volt: 125
Reset Type: Automatic
Cord Diameter Range: .28 - .65
Lift Cable Type: 7 x 19 aircraft cable
Cable Size: 1/4 in. (Compounded)
Cable Type: Galvanized
Lift Fasteners: Galvanized zinc-plated
Shipping Method: Freight
Shipping Type: (1) pallet / (1) loose ride pipe
The BH-360 PWC Lift should only be used to lift personal watercraft up to 1,250 lbs. Do not alter configuration in any way to lift wider boats. Never ride and lift during the lifting or lowering process. BH-USA does not build lifts for lifting people. You are required to install the BH-360 as instructed by the BH-360 lift guide. Ride pie should penetrate the clay bottom at least 18 in. Use pile mount with dock mount. Extra pile mounts are available for purchase. Never attempt to operate any boat lift with an extension cord or a generator. Mount the drum switch in a location that cannot be reached from the personal watercraft.

Tech Guides

BH-360 PWC Lift Guide
BH-USA Equipment Guide


11 reviews for BH-360 Belt Driven PWC Lift

Rated 4.18 Out of 5

5 star
4 star
3 star
2 star
1 star

  1. Raymond Smith

    The BH-360 is the only PWC lift that I will install on Lake Livingston. I have installed well over 100 now and we never have issues or call backs… Cat 5 Boat Lifts 936-327-2026

  2. Charles Holland (verified owner)

    The 360 lift is well designed and is very high quality constructed, especially the welds. The instructions could have been clearer, but I was able to install the lift without issues. The only problem I had was with Federal Express and their horrible customer service. BH-USA DELIVERED quickly and my order was complete.

  3. Emmett

    I am giving this lift a great review because it’s installed and working great and the 360 feature is nice. Also I got top notch service from BH, ordering on a Monday and receiving the lift via freight the following Friday. However, I feel there are a couple of minor areas for product improvement. First the slotted motor mounting should have a jack screw for easily adjusting the belt. The manual doesn’t give any guidance for the belt tension. Also the screws for mounting the cover are apparently the wrong size, as they stripped almost immediately (don’t worry I know how to tighten small screws properly without overtightening). I believe the tapped holes are 8-32 and the screws provided were 6-32. The top right screw is too long and hits the end of the worm shaft. I would recommend going to a #10-32 thread for the cover with some shorter large head screws.

  4. Regina Johnson

    Clients seem to like them and we are ordering more everyday.

  5. Larry Wurn

    Five star. What a great lift, and a great company to deal with! I have been building docks my entire life, and I LOVE the products rom BH-USA. Warm, gracious and knowledgable staff as well. Fabulous booklets explaining installation made the installation a dream job. Will definitely be getting more from this Company. Thank you for building such a high quality (and innovative) product.

  6. Great product! Worked like it said it would!

    Heather H

  7. Good quality product. Easy to install excellent customer service department

    Steve R

  8. After repeated attempts to make it work properly and even calls to BH-USA, I gave up and sold it. The problem was the ride pipe and clamp which were never kept level/square and made movement of the pwc very difficult. I used shims and tightened the clamp securely, but still problems. I lost money but was glad to be rid of this pile of junk.

    Old D

  9. Lift quickly delivered as promised and relatively easy to install. Only issue which a previous reviewer discussed is the screws for the motor cover didn't work. Solved the issue by using #10 1/2" machine screws.

    Dave P

  10. Great product I utilize in my business.

    Tony G

  11. This lift worked right after being installed, but a day or two later it stopped halfway up. It’s functioning is intermittent. It seems to get stuck or slip. My jet ski is a 2-man, not so heavy, and I got most powerful saltwater lift. I like the design if it didnt get stuck. Yesterday I could only get it up partway, them the high tide floated it off the lift. I played with the lift up and down all day& it’s barely out of the water at high tide- not high enough to swivel. I can’t return itperdireztioms, and the installer blames the quality of the lift.

    Natalie n

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top