BH-USA
Departments
View all
BH-360 A-Drive Direct Drive PWC Lift
BH-360 A-Drive Direct Drive PWC Lift
BH-360 A-Drive Direct Drive PWC Lift
BH-360 A-Drive Direct Drive PWC Lift

BH-360 A-Drive Direct Drive PWC Lift

BH-USA
  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Features a 1 HP stainless steel c-face electric motor
  • Double worm gear reducer  with 1:100 gear ratio
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, bunks, and ride pipe
  • Made in the USA

From$3,189.11
Clear Selection and Start Over
Add to List
SKU: N/A Categories: , ,

About this Item

  • Rotates 360 degrees when raised out of the water
  • Installs easily in a boathouse, canopies, or open-air docks
  • Features a 1 HP stainless steel c-face electric motor
  • Double worm gear reducer  with 1:100 gear ratio
  • Install at the minimum of 18 in. into the bottom of the body of water
  • Includes hoist, framing, fasteners, motors, bunks, and ride pipe
  • Made in the USA

BH-360 A-Drive Direct Drive PWC Lift

The BH-360 A-Drive Direct Drive PWC Lift is a small watercraft boat lift. Rotates 360 degrees when raised out of the water. 1,250 straight-line lifting capacity. Most components made from hot-dipped galvanized steel. Includes 1 HP c-face electric motor, A-Drive direct-drive hoist, guidepost kits, bunks, cable, and ride pipe. The lift mounts to the top of the dock. The ride pipe mounts, at the very least, 18 in. below the ground. Includes 26 ft. x 1/4 in. 7 x 19 aircraft cable with swaged loop. The type of cable depends on the version of the PWC lift you select. Freshwater has galvanized zinc-coated fasteners and cable. Saltwater has stainless steel fasteners and cable. Easily mounts under boathouse, canopies, or open-air docks. Made by BH-USA.

Freshwater Package

#15201 – BH-360 PWC Lift Main Housing – Freshwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#93093-6 -Elite 1 HP Stainless Steel C-Face PWC Lift Motor
#61404 – 1,500 lb. A-Drive Direct Drive PWC Hoist Gearbox
#BH09008 – 1/4 in. x 26 ft. Galvanized Steel PWC Lift Cable w/ Swaged Loop
BH-360 PWC Lift Ride Pipe

Saltwater Package

#15202 – BH-360 PWC Lift Main Housing – Saltwater
#15207 – BH-360 PWC Lift Mount Pipe – Galvanized
#15212 – BH-360 PWC Lift Guidepost Bumper Kit
#15205 – BH-360 PWC Lift Dock Mount Plate Kit
#15211 – BH-360 PWC Lift Carpeted Bunk Kit – Pair / 70 in. Long
#93093-6 -Elite 1 HP Stainless Steel C-Face PWC Lift Motor
#61404 – 1,500 lb. A-Drive Direct Drive PWC Hoist Gearbox
#36474 – 1/4 in. x 26 ft. Stainless Steel PWC Lift Cable w/ Swaged Loop
BH-360 PWC Lift Ride Pipe

Freshwater vs. Saltwater

Freshwater PWC lifts come with galvanized hardware for the housing rollers. Saltwater PWC lifts come with stainless steel hardware for the housing rollers.

Freight Shipping Policy

Questions about shipping? Review our shipping policy.

Specifications

PWC Lift Type: Freshwater Saltwater
Lift Capacity: 1,250 lbs. 1,250 lbs.
Cable Configuration: Straight Line Straight Line
Lift Speed: Up to 4 ft. / Minute (1 HP Motor) Up to 4 ft. / Minute (1 HP Motor)
Ride Pipe Dimensions: 6 ft. - 12 ft. 6 ft. - 12 ft.
Ride Pipe Measurements: Top of the deck to the bottom of the water Top of the deck to the bottom of the water
Ride Pipe (above dock): 32 in. 32 in.
Min. Bottom Penetration: 18 in. 18 in.
PWC Main Housing Dimensions: 32 in. L x 36 in. W x 6 3/8 in. H 32 in. L x 36 in. W x 6 3/8 in. H
Bunk Mount Frame Dimensions: 36 in. L x 50 1/2 in. W 36 in. L x 50 1/2 in. W
Main Housing Roller Amount: 4 4
Cradle Bunks Included: 2 2
Cradle Bunk Type: Wood Wood
Cradle Bunk Cover: Marine-grade carpet Marine-grade carpet
Cradle Bunk Cover Color: Black Black
Cradle Bunk Width: Adjustable Adjustable
Pile Mount Plate Dimensions: 18 1/2 in. L x 4 1/2 in. W x 1 1/2 in. H 18 1/2 in. L x 4 1/2 in. W x 1 1/2 in. H
Dock Mount Plate Dimensions: 24 in. x 3 in. x 7 in. 24 in. x 3 in. x 7 in.
Hoist Type: Direct Drive System Direct Drive System
Worm Reducer Size: Single Single
Gear Ratio: 1:100 1:100
Gearbox Material: Aluminum Aluminum
Drive Pipe Output Shaft: 2 3/8" OD (2" ID) 2 3/8" OD (2" ID)
Motor Output Shaft: 1.125 in. 1.125 in.
Lubrication Type: Specially blended Specially blended
Bearings: Bronze Bronze
Spool Dimensions: 5 in. x 5 1/8 in. 5 in. x 5 1/8 in.
Travel Speed:: 4 1/2 ft. / minute (1 HP electric motor) 4 1/2 ft. / minute (1 HP electric motor)
Spool Holds: 112 in. (1/4 in. cable) 112 in. (1/4 in. cable)
Mounting Holes: 3 3
Mounting Hole Size: 1/2 in. 1/2 in.
Mounting Pattern: Triangle Triangle
Mounting Slots: 2 2
Slot Size: 1 1/16 in. x 9/16 in. 1 1/16 in. x 9/16 in.
Mounting Holes: 1 1
Round Size: 9/16 in. x 9/16 in. 9/16 in. x 9/16 in.
Motor Mounting Style: C-Face (direct Input) C-Face (direct Input)
Cable Size: Up to 1/4 in. thick Up to 1/4 in. thick
Cable Type: 7 x 19 aircraft cable 7 x 19 aircraft cable
Hoist Speed: 40% faster than belt-driven 40% faster than belt-driven
Motor Size: 1 HP 1 HP
Motor Brand: Elite Motors Elite Motors
Model #: 93048 93048
Max Run Time: 15 Minutes 15 Minutes
Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in. 9 in. x 10 1/2 in. x 6 1/4 in.
Weight: 33 lbs. 33 lbs.
Horsepower: 1 1
Mounting Type: C C
RPM: 1725 1725
Service Factor: 1.15 1.15
Voltage: 115 / 230 115 / 230
Phase: 1 1
Amps: 7.8 7.8
SFtartA: N/A N/A
Herz: 60 60
AMB: 40c 40c
Frame: 56c 56c
HSG: TENV TENV
Code: L L
Insulation: A A
Shaft Diameter 5/8 in. 5/8 in.
Drum Switch Type: Momentary Momentary
Drum Switch Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in. 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Drum Switch Max Amps: 20 20
Drum Switch Max HP: 1 1/2 HP 1 1/2 HP
Drum Switch Compliance: UL, NEMA, CE, SA UL, NEMA, CE, SA
Drum Switch VAC: 120-240 120-240
Drum Switch Weight: 1.2 lbs. 1.2 lbs.
Drum Switch Box Color: Gray Gray
Drum Switch Handle Color: Red Red
Drum Switch Type: Varies Varies
Housing Material: Plastic Plastic
GFCI Plug Type: 3-US 110 V Standard 3-US 110 V Standard
Plug Cord Length: 6 in. 6 in.
GFCI to Switch Cord Length: 6 ft. 6 ft.
GFCI Dimensions: 7 in. x 2 1/2 in. x 1 in. 7 in. x 2 1/2 in. x 1 in.
GFCI Color: Black Black
GFCI Class: A-Rainproof A-Rainproof
GFCI Catalog Number: 303385214 303385214
GFCI AMP: 15 15
GFCI Hz: 60 60
GFCI Watt: 1875 1875
GFCI Volt: 125 125
Reset Type: Automatic Automatic
Cord Diameter Range: .28 - .65 .28 - .65
Lift Cable Type: 7 x 19 aircraft cable 7 x 19 aircraft cable
Cable Size: 1/4 in. (Compounded) 1/4 in. (Compounded)
Cable Type: Galvanized Stainless Steel
Lift Fasteners: Galvanized zinc-plated Stainless Steel
Shipping Method: Freight Freight
Shipping Type: (1) pallet / (1) loose ride pipe (1) pallet / (1) loose ride pipe
The BH-360 PWC Lift should only be used to lift personal watercraft up to 1,250 lbs. Do not alter configuration in any way to lift wider boats. Never ride and lift during the lifting or lowering process. BH-USA does not build lifts for lifting people. You are required to install the BH-360 as instructed by the BH-360 lift guide. Ride pie should penetrate the clay bottom at least 18 in. Use pile mount with dock mount. Extra pile mounts are available for purchase. Never attempt to operate any boat lift with an extension cord or a generator. Mount the drum switch in a location that cannot be reached from the personal watercraft.

Tech Guides

BH-360 PWC Lift Guide
BH-USA Equipment Guide

Reviews

0 review for #BH-360 A-Drive Direct Drive PWC Lift

Customers Also Bought

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Save Cart & Generate Link
Send Cart in an Email Done! close
Empty cart. Please add products before saving :)

Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Send Cart Email
Your cart email sent successfully :)

Back to Top