Aluminum Pile Mount Top Beam Bracket

  • Slides on the bottom flange of aluminum top beams
  • Mounts to the side of the dock piling
  • Helps prevent side-to-side movement due to weather
  • Made from 6061-T6 US aluminum
  • Can be mounted on inside or outside of the dock piling

From$73.75

Clear Selection and Start Over

About this Item

  • Slides on the bottom flange of aluminum top beams
  • Mounts to the side of the dock piling
  • Helps prevent side-to-side movement due to weather
  • Made from 6061-T6 US aluminum
  • Can be mounted on inside or outside of the dock piling

Aluminum Pile Mount Top Beam Bracket

The Aluminum Pile Mount Top Beam Bracket is a safety securement bracket for aluminum pile mount boat lifts. The bracket slides onto the bottom flange of the aluminum top beam. The top beam rests on the top of the dock piling. The bracket installs on the dock piling as an added securement bracket. The bracket helps keep the top beam from moving side to side or being lifted during bad weather. Features a no-weld design. Uses stainless steel fasteners with PVC isolators so the aluminum bracket does not touch the dock piling wood. Available in (3) sizes for different size pile mount boat lifts. Secures top beams up to 7 in. channel. The bracket pieces mounting on the aluminum top beam are adjustable making it easier to install. Made from 6061-T6 US aluminum. Made by BH-USA.

Dock piling mounting fasteners not included.

The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.

Specifications

6,000 - 8,000 lbs. 9,000 - 10,000 lbs. 12,000 - 20,000 lbs.
Material: Aluminum Aluminum Aluminum
Material Type: 6061-T6 US 6061-T6 US 6061-T6 US
Channel Size: 5 in. 6 in. 7 in.
Mounting Holes: 2 2 2
Mounting Hole Size: 5/8 in. 5/8 in. 5/8 in.
Mounting Hole Placement: Center Center Center
Clamp Spread: 7 3/4 in. 8 1/4 in. 10 1/4 in.
Protection: PVC isolators PVC isolators PVC isolators
Nylock Nut Material: Stainless steel Stainless steel Stainless steel
Nylock Nuts: 2 2 2
Nylock Size: 3/8 in. 3/8 in. 3/8 in.
Nylock Nut Thread Count: 16 NC 16 NC 16 NC
Hex Head Bolt Material: Stainless steel Stainless steel Stainless steel
Hex Head Bolts: 2 2 2
Hex Head Bolt Size: 3/8 in. x 1 in. 3/8 in. x 1 in. 3/8 in. x 1 in.
Flat Washer Material: Stainless steel Stainless steel Stainless steel
Flat Washers: 2 2 2
Flat Washer Size: 3/8 in. 3/8 in. 3/8 in.
Cap Nut Material: Stainless steel Stainless steel Stainless steel
Cap Nuts: 2 2 2
Cap Nut Size: 1/2 in. 1/2 in. 1/2 in.
Rod Material: Stainless steel Stainless steel Stainless steel
Rods: 1 1 1
Rod Size: 1/2 in. x 10 in. 1/2 in. x 10 1/2 in. 1/2 in. x 12 1/2 in.
Rod Thread: 1 in. 1 in. 1 in.
Rod Thread Location: Both ends Both ends Both ends
The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.

Tech Guides

BH-USA Equipment Guide

Reviews

0 review for #Aluminum Pile Mount Top Beam Bracket

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top