About this Item
- Mount Lift to Side of Piling
- 6061-T6 Aluminum
- 3000 lb. Per bracket Standard
- 5000 lb. Per bracket Heavy Duty
- Stainless Hardware
Aluminum Lift Side Mount Bracket
The Aluminum Lift Side Mount Bracket allows installation of Aluminum pile mount top beams inside boat houses or in marinas where pilings are shared. Secure these all aluminum brackets to the side of the pilings then secure your top-beams to the brackets. Aluminum Lift Side Mount Brackets are made from Marine Grade 6061-T6 aluminum and come with all stainless steel hardware. Brackets have two holes punched for 5/8″ bolts (not included) to secure to your piling and has PVC plastic isolators attached to insure the aluminum does not touch the wood piling.
||15" (H) x 4" x 11"
||3000 lbs. MAX or HD Bracket 5000 lbs. MAX
|Attach to Piling
||(2) 5/8" GR 5 Bolts (Not Included)
|Safe Load distance from channel face
|Bolt mount for lift
||(4) 1/2" 304SS bolts (not included) drill to lift flange
Due to the extreme leverage when using side mount brackets do not attempt to install a lift any larger than 8,000 lbs total on the BH-USA Side Mount bracket # 50064. Always compound any lift when using a side mount bracket to distribute the load. Mount lift as close to the piling as possible and must have load at 5.5" from channel face. When compounding make sure both sides dead man are facing the bracket channel to insure load does not pass the 5.5" mark. NEVER attempt to install a lift using boat slings with side mount brackets. Brackets must be mounted on outside of lift points at standard pile mount locations. For Heavier applications up to a 10,000 lb lift, use BH-USA Heavy Duty Side Mount Brackets # 84893 The HD brackets have extra gussets welded to the bracket. Regardless of bracket size, never attempt to lift more than a 10,000 lb boat on side mount brackets.