Important Information About BH-USA Operations & Ordering during the Coronavirus Pandemic

A-Drive 40:90 Hoist Hanger Kit for Wood Beams

  • Center Mount Recommended
  • Works with A-Drive 7,000 lb. Hoists
  • Fits 1.5 ID or 2 ID drive pipes
  • Powder-coated or galvanized finish
  • Converts flat-plate hoists to the BH-USA A-Drive hoist
  • Includes mounting plate and driveshaft kit

From$90.00

Clear Selection and Start Over

About this Item

  • Center Mount Recommended
  • Works with A-Drive 7,000 lb. Hoists
  • Fits 1.5 ID or 2 ID drive pipes
  • Powder-coated or galvanized finish
  • Converts flat-plate hoists to the BH-USA A-Drive hoist
  • Includes mounting plate and driveshaft kit

A-Drive 40:90 Hoist Hanger Kit for Wood Beams

The A-Drive 40:90 Hoist Hanger Kit for Wood Beams is designed for the  7,000 lb. A-Drive Direct Drive Boat Lift Hoist. The hoist hanger mounts to a wood beam or wood joist with (2) 1/2 in. mounting holes on the square end of the hanger plate. Used for upgrading your hoist from a flat-plate boat hoist to a direct-drive boat hoist. It follows the same mounting hole pattern as a flat-plate boat hoist. Made out of steel. Laser-cut mounting holes. Two coatings, hot-dipped galvanized or powder coated silver. The hanger plate follows industry-standard flange mounting guidelines. Allows easy adjustment to drive pipe supports already mounted. Center mounting recommended.

Installation:

When installed at the industry-standard vertical mounting, the mounting holes line up where the flat-plate boat hoist use to be. Horizontally mounting will require drilling extra holes in the wood beams to accommodate.

1.5″ ID Drive Pipe Kit Includes:

(1) #95822 – A-Drive Hoist Hanger Plate for Wood Beams
(1) #36432 – A-Drive 40:90 Drive Shaft Kit – 1.5 in. Drive Pipe Size
(4) #95817 – Stainless Steel Hex Head Bolts – 1/2 in. x 1 1/2 in.
(8) #21234 – Stainless Steel Flat Washers – 1/2 in.
(4) #33872 – Stainless Steel Split Lock Washers – 1/2 in.
(4) #21218 – Stainless Steel Nuts – 1/2 in.

2″ ID Drive Pipe Kit Includes:

(1) #95822 – A-Drive Hoist Hanger Plate for Wood Beams
(1) #36431 – A-Drive 40:90 Drive Shaft Kit – 2 in. Drive Pipe Size
(4) #95817 – Stainless Steel Hex Head Bolts – 1/2 in. x 1 1/2 in.
(8) #21234 – Stainless Steel Flat Washers – 1/2 in.
(4) #33872 – Stainless Steel Split Lock Washers – 1/2 in.
(4) #21218 – Stainless Steel Nuts – 1/2 in.

BH-USA A-Drive Direct Drive Boat Hoists

Hoist Capacity A-Drive Direct Drive Gearbox
Boat Lift Motor
3,000 lbs. 40:75 Double Worm Reducer Elite 3/4 HP Stainless Steel C-Face Motor
4,000 lbs. 40:75 Double Worm Reducer Elite 1 HP Painted C-Face Motor
4,000 lbs. 40:75 Double Worm Reducer Elite 1 HP Stainless Steel C-Face Motor
7,000 lbs. 40:90 Double Worm Reducer Elite 1 1/2 HP Stainless Steel C-Face Motor

Specifications

Plate Dimensions: 11 1/4 in. x 10 3/4 in.
Metal Thickness: 1/4 in.
Plate Design: Converts flat-plate hoists to A-Drive hoists
Plate Material: Steel
Plate Finish: Hot-dipped galvanized or powder-coated
Mounting Holes: 6
Slotted Mounting Hole Amount: 4
Slotted Hole Size: 1 in. x 1/2 in.
Wood Beam Mounting Holes: 2
Wood Mounting Hole Size: 1/2 in.
Drive Pipe Mounting Hole Size: 2 7/8 in.

40:90 - 1.5 in. Drive Pipe Version

Weight: 5.8 lbs.
Dimensions: 13 1/4 in. x 1 1/2 in. x 1 1/2 in.
Input: 1 7/8 in. x 1 1/4 in. x 3/16 in.
Output: 8 7/8 in. x 1 1/2 in. x 1 1/2 in.
Mounting Holes: (2) 1/2 in.
Keystock Groove: 4 in. x 1/4 in.
Keystock Size: 3 5/8 in. x 1/4 in. x 1/4 in.

40:90 - 2 in. Drive Pipe Version

Weight: 8.55 lbs.
Dimensions: 13 1/4 in. x 1 7/8 in. x 1 7/8 in.
Input: 1 7/8 in. x 1 3/8 in. x 5/8 in.
Output: 8 7/8 in. x 1 7/8 in. x 1 7/8 in.
Mounting Holes: (2) 1/2 in.
Keystock Groove: 4 in. x 1/4 in.
Keystock Size: 3 5/8 in. x 1/4 in. x 1/4 in.
Please note that BH-USA supplies with all A-Drive drive shafts a GR5 hardened bolt to attach the drive pipe to the shaft. Only use the bolt provided by BH-USA, if you lose this bolt you must order another one from BH-USA Item 82011FA. Do not use any other bolt, by doing so the bolt may shear dropping your boat.

Tech Guides

BH-USA Equipment Guide

Reviews

0 review for #A-Drive 40:90 Hoist Hanger Kit for Wood Beams

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top