About this Item
- Attaches direct drive boat hoist to a drive pipe
- Made from hardened steel then zinc-plated
- Withstands marine environments
- Fits BH-USA A-Drive Direct Drive Hoist systems
- Machined tab input
The A-Drive 40:90 Drive Shaft Kit is designed to attach to a 7,000 lb. A-Drive Direct Drive Boat Hoist. Made from hardened steel then zinc-plated for protection against marine conditions. Features a welded, machined tab on the input side. Will accept a KALS BH-USA A-Drive Limit Switch.
Kit Includes:
7 K Drive Shaft w/ welded input tab
1/2″ x 3 1/2″ Zinc-Plated Grade 5 Hex Head Bolt
1/2″ Zinc-Plated Nylock Nut
BH-USA A-Drive Direct Drive Boat Hoists
Specifications
1.5 in. Drive Pipe Version
| Weight: |
5.8 lbs. |
| Dimensions: |
13 1/4 in. x 1 1/2 in. x 1 1/2 in. |
| Input: |
1 7/8 in. x 1 1/4 in. x 3/16 in.
|
| Output: |
8 7/8 in. x 1 1/2 in. x 1 1/2 in. |
| Mounting Holes: |
(2) 1/2 in. |
| Keystock Groove: |
4 in. x 1/4 in. |
| Keystock Size: |
3 5/8 in. x 1/4 in. x 1/4 in. |
2 in. Drive Pipe Version
| Weight: |
8.55 lbs. |
| Dimensions: |
13 1/4 in. x 1 7/8 in. x 1 7/8 in. |
| Input: |
1 7/8 in. x 1 3/8 in. x 5/8 in.
|
| Output: |
8 7/8 in. x 1 7/8 in. x 1 7/8 in. |
| Mounting Holes: |
(2) 1/2 in. |
| Keystock Groove: |
4 in. x 1/4 in. |
| Keystock Size: |
3 5/8 in. x 1/4 in. x 1/4 in. |
Please note that BH-USA supplies with all A-Drive drive shafts a GR5 hardened bolt to attach the drive pipe to the shaft. Only use the bolt provided by BH-USA, if you lose this bolt you must order another one from BH-USA Item 82011FA. Do not use any other bolt, by doing so the bolt may shear dropping your boat.
A-Drive Direct Drive Boat Hoist Guide
Thanks for print shipment.
JOSEPH M SMITH S –