About this Item
- Solid Cast Iron
- Precision Machining
- Gear only
96 Tooth Cast Iron Worm Gear
The 96 Tooth Cast Iron Worm Gear, also referred to as a bull-gear, designed to fit any BH-USA flat-plate boat hoists. The worm gear mounts on the top of the gear plate. Grease fitting installed on the drive pipe opening. Includes install sleeve, backplate bearing with snap rings, and axle sleeve bolt. Match a cast iron gear with a steel bronze worm. Do not attempt to put a bronze gear on a bronze worm. Does not include the sleeve, snap rings, bearing, or any fasteners.
Specifications
| Material |
Cast Iron |
| No. of Teeth |
96 |
| Gear Bore w/o Sleeve |
2.875 |
| Diameter |
12.75" |
| Depth w/ Hub |
2" |
| No. of THDS |
1 |
| Match with |
Single Thread Steel Worm Only |
| Weight |
11.70 lbs. |
Disclaimer: To enable existing hoist owners to repair or replace machined items, BH-USA makes available machine parts used exclusively in the Boat Hoist USA brand flat-plate hoist.BH-USA brand machined parts should NEVER be used with any other brand flat-plate hoist or machined parts. BH-USA does not warranty any individual machine part or any other re-built/repaired flat-plate hoists. Lift-Tex Inc. does not assume ANY liability for damages to person or property when machined parts are used in the re-build of a flat plate hoist, regardless of brand. The purchase of, and use of any machine part sold by BH-USA is at the sole risk of the user and is non-returnable and carries no warranty. BH-USA does not guarantee any individual machined part will fix an existing problem or work as designed. It is the recommendation of BH-USA to purchase a new flat-plate hoist that has been built and tested onsite at BH-USA rather than to attempt to repair an existing hoist.
BH-USA Equipment Guide
Reviews
0 review for #96 Tooth Cast Iron Worm Gear