About this Item
- Strong Steel Welded Construction
- Hot Dipped Galvanized
- Rugged and Durable
- Includes cable and Hoists
8K Galvanized 4 Post Top Beam Kit w/ Flat Plate Hoists
The 8K Galvanized 4 Post Top Beam Kit w/ Flat Plate Hoists consists of a set with 2 hot-dipped galvanized top beams, hoists and motors to power the lift . Includes an 8,000-pound lift hardware and cable kit. Features (2) Elite Motors boat lift motors one wired with 16 ft. control cable and the other wired with 45 ft. control cable. Includes the flat-plate hoist front and back cover and mounting hardware. Made by BH-USA. This set does not include any cradle or slings, allowing you to choose the cradle or slings that best match your boat.
(2) #84074FB – 12K 13′ Galvanized Top Beam w/ Dead Man Brackets
(2) #09001 – Bright White Flat Plate Hoist Back Cover
(1) #17532 – 6K-8K Galvanized Lift Hardware & Cable Kit
(2) #12594 – 4,000 lb. Deluxe Powdercoated Gear Plate Assembly
(1) #79615 – Elite 1 HP Painted 56 Frame Boat Lift Motor – Maintained / 110v / 16 ft.
(1) #79615-45 – Elite 1 HP Painted 56 Frame Boat Lift Motor – Maintained / 110v/ 45 ft.
(2) #07298 – Bright White BH-USA Logo Flat Plate Hoist Front Cover
(2) #07299 – Flat Plate Hoist Cover Mounting Hardware Kit
|Top Beam Capacity:
|| 8,000 lb. Each (2 Included)
|Top Beam Structure:
|| 6" x 4" Wide Flange Steel (12 lb. per ft.)
|Top Beam Length:
|| 13 ft.
|Drive Pipe Material:
|| HDG sch. 40 Steel
|Drive Shaft OD x ID:
|| 2 3/8" OD (2" ID)
|| 5/16 in.
|| 7 x 19 Galvanized Steel Aircraft Cable
|| 15 ft. Sections
|| Single (Dead Man Tabs)
|Gear Plate Type:
||4,000 lb. GPA (Pre-Mounted)
|Electric Motor Type:
||(2) Elite 1 HP Painted 56 Frame
||120v (240v Rewired)
|Motor Switch Type:
||(2) Drum Maintained (Lock-On)
|Min. Piling Size:
||4 per Beam, Welded Sleaves
||Grease able Fittings
||UL, NEMMA, GFCI Protected
|Control Cable Size:
||(1) 16 ft. / (1) 45 ft.
|Control Cable Type:
||15 ft. x 3 ft. x 2 ft. Wooden Crate
BH-USA Galvanized 4 post lifts are individually crated and can only be shipped via motor freight. Product shipped motor freight is the purchaser's responsibility to arrange for a delivery address that is accessible and has a fork truck available. If a Fork Truck is not available you can arrange to hand unload the crate. BH-USA will request a call from the freight company to the purchaser to help facilitate this arrangement. Missed deliveries can incur extra freight charges that will be the purchaser’s responsibility. All galvanized top beams come with the welded dead-man tab for compounding. The 12,000 lb. rating is based on the use of both top beams mounted to the top of pilings and compounding the overall lift. The 4 post lifts are engineered to work with BH-USA rated Cradles only or use with BH-USA polyester rated slings. Custom cradles or plat-forms are used at the end-users risk and BH-USA cannot be held liable for failer caused by non-BH-USA equipment or use outside intended design.