About this Item
- No-weld aluminum design
- 316 stainless steel fasteners
- Fits on 4 dock pilings
- Includes cable winder, cable, and mounting fasteners
- 1.5 ID galvanized drive pipe
- Bronze bearings with 1/4 in. easy-to-reach grease fittings
The 8K Aluminum Four Post Pile Mount Top Beam Set is designed for piling mount boat lifts. The top beams install on top of four dock pilings. Features a no-weld design. Includes all 316 stainless steel mounting fasteners. The bronze bearings have 1/4 in. easy-to-reach grease fittings. The top beam is drilled out for a flat-plate hoist to be installed onto a flat-plate hoist. Made of sch. 40 galvanized steel. Measures 12 ft. 6 in. with a 1.5 in. ID. Includes one direction side-mounted (boat lift style) cable winders. Made by Coastal Series Boat Lifts. Does not include bunks, guideposts, or bunk mounting kit.
Set Includes:
(2) #17504 – 6K-8K Aluminum Four Post Pile Mount Top Beam
(2) #70373 – 6″ Aluminum Cradle Beam w/ Sheave Housings – 12 ft. 6 in.
(1) #20361 – Classic Classic Flat Plate Hoist Front Cover – Bright White / No Logo
(1) #20363 – Classic Flat Plate Hoist Back Cover – Bright White
(2) #42232 – Dual Boat Lift Switch Mounting Plate
(1) #17521 – 6K-8K Aluminum Pile Mount Hardware Kit
(2) #12617 – 4,000 lb. Standard Gear Plate Assembly – 1/2 in. Thick Aluminum
(1)# 79615 – Elite 1 HP Painted Boat Lift Motor – Maintained / 110v / 16 ft.
(1) #79615-45 – Elite 1 HP Painted Boat Lift Motor – Maintained / 110v / 45 ft.
Specifications
Lifting Capacity: |
4,000 lbs / Beam |
Top Beam Dimensions: |
12 ft. 6 in. L x 2 1/2 in. W x 6 in. H |
Top Beam Type: |
Channel |
Top Beam Material: |
6061-T6 US Aluminum |
Drive Pipe Finish: |
Hot-Dipped Galvanized |
Drive Pipe Type: |
Sch. 40 |
Beam Weight: |
2.212 lbs. / ft. |
Pipe Bearings: |
4 / Beam |
Pipe Bearings Material: |
Bronze |
Bearing Maintenance |
Grease Fittings |
Grease Fitting Size: |
1/4 in. |
Cable Size: |
5/16 in. |
Cable Length: |
15 ft. |
Cable Winders: |
2 |
Cable Winder Style: |
Side-Mounted (Boat Lift Style) |
Cable Winder Type: |
Single Direction |
Cable Winder Fits: |
1.5 in. ID Drive Pipe |
Drive Pipe Dimensions: |
12 ft. 4.5 in. L (1,5 in. ID) |
Fasteners |
Stainless Steel |
6" Aluminum Cradle Beam w/ Sheave Housings
Cradle Beam Measurements: |
6 in. wide x 4 in. flange |
Cradle Beam Weight: |
58.75 lbs. |
Cradle Beam Material: |
6061-T6 US aluminum |
Sheave Housing Measurements: |
6 in. web x 4 in. flange |
Sheave Housing Fits: |
4 in. flange (I-beam) |
Sheave Housing Fasteners: |
316 stainless steel |
Sheave Housing Accepts: |
4 in. sheave w/ bronze bushing |
Sheave Bolt Bore: |
3/4 in. |
Sheave Housing Material: |
6061-T6 US Aluminum |
Sheave Mounting Hex Head Bolts: |
(4) 1/2 in. x 2 1/2 in. stainless steel |
Sheave Housing Lock Washers: |
(4) 1.2 in. stainless steel |
Sheave Housing Nuts: |
(4) 1/2 in. stainless steel |
4,000 lb. Standard Gear Plate Assembly
Rated Capacity: |
4,000 lbs. |
Tested Capacity: |
Straight line
|
Gear Plate Dimensions: |
2 ft. x 1 ft.
|
Bull Gear Ratio: |
96:1 |
Back Plate Bearing: |
Bronze Composite |
96 Tooth Gear Material: |
Cast Iron |
Worm Material: |
Hardened Bronze |
Hoist Pulley Size: |
10 in.
|
Hoist Pulley Material: |
Zinc die-cast |
Drive Belt Size: |
34 in. |
Drive Belt Type: |
AX-34 cogged belt |
Weight: |
34-47 lbs. |
Warranty: |
Lifetime |
Manufacturer: |
BH-USA |
Elite 1 HP Painted Boat Lift Motor
Model #: |
60421 |
Max Run Time: |
15 Minutes |
Dimensions: |
9 in. x 11 in. x 6 in.
|
Weight: |
27 lbs. |
Catalog #: |
N/A |
SKU: |
N/A |
Horsepower: |
1 |
Mounting Type: |
56 Frame |
RPM: |
1725 |
Service Factor: |
1.0 |
Voltage: |
115 / 230 |
Phase: |
1 |
Amps: |
7.8 |
SFtartA: |
6.2 |
Herz: |
60 |
AMB: |
40c |
Frame: |
56 |
HSG: |
TENV |
Code: |
L |
Insulation: |
A |
Shaft Diameter |
5/8 in.
|
|
|
All boat cradles, cradle beams, and boat lift ship freight. It is the responsibility of the purchaser to unload the freight from the delivery truck. The purchaser must be present during delivery. For more questions, visit our shipping terms and conditions. All BH-USA top beams are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. The purchaser must be present during delivery. For more questions, visit our
shipping terms and conditions.
Reviews
0 review for #8K Aluminum Four Post Pile Mount Top Beam Set