8,000 lb. Aluminum Four Post Pile Mount Boat Lift

  • 8,000 lb. straight-line cable lifting capacity
  • Mounts to 4 pilings
  • 6061-T6 US aluminum top beams
  • Features maintained drum switches
  • Features 110v motors
  • In-line GFCI control cable
  • Complete lift ships freight in a crate

From$5,278.00

Clear Selection and Start Over

About this Item

  • 8,000 lb. straight-line cable lifting capacity
  • Mounts to 4 pilings
  • 6061-T6 US aluminum top beams
  • Features maintained drum switches
  • Features 110v motors
  • In-line GFCI control cable
  • Complete lift ships freight in a crate

8,000 lb. Aluminum Four Post Pile Mount Boat Lift

The 8,000 lb. Aluminum Four Post Pile Mount Boat Lift is designed to mount on the tops of four dock pilings. The lift uses a 15 ft. cable straight-line configuration. This results in an 8,000 lb. lift capacity rating. Features no-weld design. Made of 6061-T6 US aluminum. Made by Coastal SeriesBracket long bolts for pilings not included.

Freight Shipping Policy

Questions about shipping? Review our shipping policy

Lifting Capacity Hoist Size Style Hoist Type Motor Horsepower Motor Finish Frame Piling Amount Cable Configuration Thickness Length
6,000 lbs. 4,000 lb.  Standard Gear Plate 3/4 HP  Painted Clawfoot 4 Straight-Line 5/16 in. 15 ft.
6,000 lbs. A-Drive 40:75  Double Worm Reducer Direct Drive 3/4 HP  Stainless steel  C-Face 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. 4,000 lb. Standard Gear Plate 1 HP Painted Clawfoot 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. A-Drive 40:75  Double Worm Reducer Direct Drive 1 HP Stainless steel C-Face 4 Straight-Line 5/16 in. 15 ft.
9,000 lbs. 4,000 lb.  Standard Gear Plate 1 HP Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
9,000 lbs. A-Drive 40:75   Double Worm Reducer Direct Drive 1 HP  Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
12,000 lbs. 4,000 lb.  Standard Gear Plate 3/4 HP  Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
12,000 lbs. A-Drive 40:90  Double Worm Reducer Direct Drive 1 HP  Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
16,000 lbs. 6,500 lb.  Deluxe Gear Plate 1 HP  Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
16,000 lbs. A-Drive 40:90 Double Worm Reducer Direct Drive 1 HP Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 8,500 lb. Advanced Dual Pulley Gear Plate 1 1/2 HP Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
20,000 lbs. A-Drive 40:90 Double Worm Reducer Direct Drive 1 1/2 HP Stainless steel  C-Face 4 Compounded 5/16 in. 33 ft.

Specifications

Capacity 8,000 lbs.
Cable Diameter 5/16 in.
Cable Make Stainless Steel
Cable Length 15 ft.
Cable Configuration Straight-Line
Minimum Piling Size 8 in. (diameter)
Electrical UL, NEMA, GFCI Protected
UL File E464499
Limit Switch Bracket Bracket Included (Limit Switch Optional)
Packing Wood Crate 15 ft. x 2 ft. x 2 ft.
Weight 900-950 lbs.

6K-8K Aluminum Four Post Pile Mount Top Beam

Lifting Capacity: 4,000 lbs / Beam
Top Beam Dimensions: 12 ft. 6 in. L x 2 1/2 in. W x 6 in. H
Top Beam Type: Channel
Top Beam Material: 6061-T6 US Aluminum
Drive Pipe Finish: Hot-Dipped Galvanized
Drive Pipe Type: Sch. 40
Beam Weight: 2.834 lbs. / ft.
Pipe Bearings: 4 / Beam
Pipe Bearings Material: Bronze
Bearing Maintenance Grease Fittings
Grease Fitting Size: 1/4 in.
Cable Winders: 2
Cable Winder Style: Side-Mounted (Boat Lift Style)
Cable Winder Type: Single Direction
Cable Winder Fits: 1.5 in. ID Drive Pipe
Drive Pipe Dimensions: 12 ft. 4.5 in. L (1,5 in. ID)
Fasteners Stainless Steel

6" Aluminum Cradle Beam w/ Sheave Housings

Cradle Beam Measurements: 6 in. wide x 4 in. flange
Cradle Beam Weight: 58.75 lbs.
Cradle Beam Material: 6061-T6 US aluminum
Sheave Housing Measurements: 6 in. web x 4 in. flange
Sheave Housing Fits: 4 in. flange (I-beam)
Sheave Housing Fasteners: 316 stainless steel
Sheave Housing Accepts: 4 in. sheave w/ bronze bushing
Sheave Bolt Bore: 3/4 in.
Sheave Housing Material: 6061-T6 US Aluminum
Sheave Mounting Hex Head Bolts: (4) 1/2 in. x 2 1/2 in. stainless steel
Sheave Housing Lock Washers: (4) 1.2 in. stainless steel
Sheave Housing Nuts: (4) 1/2 in. stainless steel

8 in. x 12 ft. Prefabricated Aluminum Cradle Bunk

Cradle Bunk Dimensions: 12 ft. x 8 in. Web x 5 in. Flange
Cradle Bunk Weight: 2.898 lbs. / linear ft.
Angle: 19 degrees
Material: Marine-grade 6061-T6 US aluminum
Padding: Rubber
Padding Material: Black
Shipment Type: Loose Beam / Freight

4,000 lb. Standard Gear Plate Assembly (Flat-Plate Hoist)

Rated Capacity: 4,000 lbs.
Tested Capacity: Straight line
Gear Plate Dimensions: 2 ft. x 1 ft.
Bull Gear Ratio: 96:1
Back Plate Bearing: Bronze Composite
96 Tooth Gear Material: Cast Iron
Worm Material: Hardened Bronze
Hoist Pulley Size: 10 in.
Hoist Pulley Material: Zinc die-cast
Drive Belt Size: 34 in.
Drive Belt Type: AX-34 cogged belt
Weight: 34-47 lbs.
Warranty: Lifetime
Manufacturer: BH-USA

Elite 1 HP 56 Frame Painted Boat Lift Motor (Flat-Plate Hoist)

Model #: 60421 Max Run Time: 15 Minutes
Dimensions: 9 in. x 11 in. x 6 in. Weight: 27 lbs.
Catalog #: N/A SKU: N/A
Horsepower: 1 Mounting Type: 56 Frame
RPM: 1725 Service Factor: 1.0
Voltage: 115 / 230 Phase: 1
Amps: 7.8 SFtartA: 6.2
Herz: 60 AMB: 40c
Frame: 56 HSG: TENV
Code: L Insulation: A
Shaft Diameter 5/8 in.

A-Drive 40:75 Double Worm Reducer Gearbox (Direct Drive Hoist)

Type 40:75
Actual Ratios 450:1
Make Aluminum w/ Stainless Fasteners
Lube Special blend gear grease permanently
Motor Mount C-Face
Manufacturer BH-USA
Warranty 5 Year
Motor Input Rotational 360 Degrees

Elite 1 HP C-Face Stainless Steel Boat Lift Motor (Direct Drive Hoist)

Model #: 93048 Max Run Time: 15 Minutes
Dimensions: 9" x 10 1/2" x 6 1/4" Weight: 33 lbs.
Catalog #: N/A SKU: N/A
Horsepower: 1 Mounting Type: C
RPM: 1725 Service Factor: 1.15
Voltage: 115 / 230 Phase: 1
Amps: 7.8 SFtartA: N/A
Herz: 60 AMB: 40c
Frame: 56c HSG: TENV
Code: L Insulation: A
Shaft Diameter 5/8"
Pile mount brackets are included, long bolts to mount the brackets to the pilings are not. All BH-USA top beams are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. The purchaser must be present during delivery. For more questions, visit our shipping terms and conditions.

Tech Guides

6,000 lbs.-16,000 lbs. Aluminum Four Post Lift Guide

Reviews

0 review for #8,000 lb. Aluminum Four Post Pile Mount Boat Lift

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top