About this Item
- Made from 6061-T6 US aluminum
The 6K-8K Aluminum Pile Mount Hardware Kit is a mounting kit for the Aluminum style piling mount boat lifts.
Aluminum Pile Mount Top Beam Bracket
The Aluminum Pile Mount Top Beam Bracket is a safety securement bracket for aluminum pile mount boat lifts. The bracket slides onto the bottom flange of the aluminum top beam. The top beam rests on the top of the dock piling. The bracket installs on the dock piling as an added securement bracket. The bracket helps keep the top beam from moving side to side or being lifted during bad weather. Features a no-weld design. Uses stainless steel fasteners with PVC isolators so the aluminum bracket does not touch the dock piling wood. Available in (3) sizes for different size pile mount boat lifts. Secures top beams up to 7 in. channel. The bracket pieces mounting on the aluminum top beam are adjustable making it easier to install. Made from 6061-T6 US aluminum. Made by BH-USA.
Dock piling mounting fasteners not included.
The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.
Flat-Plate Pipe Reduction Sleeve
The Flat-Plate Pipe Reduction Sleeve changes the drive pipe output from 2 in. ID to a standard 1 1/2 in. ID driveshaft. Most commonly used on pile mount boat lifts. Features a 2.067 in. inside diameter. Schedule 40 wall thickness. Made from marine-grade 6061-T6 US aluminum. Predrilled to fit the flat-plate hoist drive pipe.
(4) Aluminum Pile Mount Top Beam Bracket
(2) Aluminum Flat-Plate Hoist Mount
(1) Aluminum Lift Hoist Mount Fastener Pack
(1) Four Post Limit Switch Bracket & Fastener Pack
(1) #36438 – Flat-Plate Pipe Reduction Sleeve
(8) Grey PVC Isolators – 2 in. x 12 in.
(1) 6K -8K Aluminum Cradle Bracket Bolts