2021 BH-USA Holiday & Shut-Down Schedule

30,000 lb. Aluminum Eight Post Pile Mount Lift

  • Features a no-weld construction
  • Made from 6061-T6 US aluminum
  • Uses all stainless steel fasteners
  • Made in the USA

$21,212.35

About this Item

  • Features a no-weld construction
  • Made from 6061-T6 US aluminum
  • Uses all stainless steel fasteners
  • Made in the USA

30,000 lb. Aluminum Eight Post Pile Mount Lift

The 30,000 lb. Aluminum Eight Post Pile Mount Lift is a two boat hoist, 4 motor system. It provides an extraordinary strong lift capable of lifting up to 30,000 lbs. Made from 6061-T6 US aluminum. The all-aluminum lift features an industry-leading no-weld design. It uses hardened marine-grade stainless steel fasteners. The extrusions make it the most reliable and strongest lift in the industry. Made by Coastal SeriesBracket long bolts for pilings not included.

BH-USA Coastal Series boat lifts powered by the BH-USA A-Drive direct-drive hoists and Elite Motors stainless steel c-face motors. Ready to install on 8 existing dock pilings with a minimum of 10 in. diameter. Made in the USA.

Requires 8 pilings with a minimum of 10 in. diameter. Pile Mount brackets included.

Specifications

Lifting Capacity: 30,000 lbs.
Pilings Required: 8
Piling Diameter Minimum: 10 in.
Pile Mounting Bolts: Not included
Pile Mount Brackets: Included
Top Beam Length: 72 in. (outside to outside)
Top Beam Amount: 4
Cable Winders: 2 (per top beam)
Cable Winder Style: Single directional
Cable Diameter: 3/8 in.
Cable Make: 7 x 19 aircraft cable
Cable Material: Stainless steel
Cable Length: 36 ft.
Cable Sections: 2 (per beam)
Cable Configuration: Compounded (2 part)
Pipe Bearing: Bronze
Pipe Bearing Amount: 4 (per top beam)
Bearing Maintenance: Grease-able
Aluminum Cradle Dimensions: 18 ft. L x 10 in. Web x 6 in. Flange
Cradle Beam Weight: 10.29 / linear ft.
Fasteners: Stainless steel
Bunk Material: Aluminum
Bunk Material Style: : 6061-T6 US
Bunk Type: Cradle
Length: 10 ft.
Padding Material: Rubber
Padding Design: Non-marking
Padding Color: Black
Bunk Height: 8 in. (5 in. Flange)
Bunk Angle: 19 degrees
8 in. Cradle Bunk Weight: 2.898 lbs. / linear ft.
Aluminum Sheave Housing Dimensions: 7 in. x 4 in. x 5/12 in.
Sheave Housing Rating: 2.5 ton (based on I-beam rating)
Sheave Size: 4 in.
Lift Size: 7,000 lbs.
Motor HP: 1 1/2 HP
Motor Finish: Stainless Steel
Motor Brand: Elite
Gearbox Type: Double worm reducer
Gearbox Input: Direct drive
Gearbox Weight: 38.3 lbs.
Gearbox Material: Aluminum
Gearbox Finish: Silver
Gear Type: 40:90 configuration
Actual Ratio: 450:1
Lubrication: Specially blended gear grease
Lubrication Application: Permanently sealed in the gearbox
Motor Flange to Driveshaft Flange Offset: 1.22 in.
Overall Dimensions: 11.16 in. L x 7.21 in. W x 13.23 in. H
Output Shaft Size: 1 1/4 in.
Input Motor Shaft Size: 5/8 in.
Motor Shaft to Drive Pipe Shaft: 6.59 in.
Drive Pipe Mounting Bolt Size: (4) .55 in.
Drive Pipe Bolt Mount Hole to Bolt Mount Hole: 4.59 in.
Driveshaft Gearbox Dimensions: 8.07 in. L x 5.04 in. W x 6.77 H
Motor Mounting Type: C-Face
Motor Mounting Bolt Size: (4) 7/16 in.
Motor Bolt Mount Hole to Bolt Mount Hole: 4.15 in.
Motor Gearbox Dimensions: 4.78 L x 3.94 in. W x 3.37 in. H
Motor A-Drive Output Torque: 7,399 lbs./in.
Maximum Run Time: 15 minutes
Motor Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in.
Weight: 39.65 lbs.
Horsepower: 1 1/2 HP
Mounting Type: C
RPM: 1725
Service Factor: 1.15
SFA: 8.8 (220v)
Voltage: 220v
Phase: 1
Amps: 7.7
Herz: 60
AMB: 40°C
Frame: 56C
HSG: TENV
Code: E
Insulation: F
Shaft Diameter: 5/8 in.
Dimensions: 3 1/2 in. x 4 1/2 in. x 4 1/2 in.
Max Amps: 20
Max HP: 1 1/2 HP
Compliance: UL, NEMA, CE, SA
VAC: 120-240
Weight: 1.2 lbs.
Box Color: Gray
Handle Color: Red
Switch Type: Maintained (Lock-On)
Housing Material: Plastic
Plug Type 3-US 110 V Standard
Plug Cord Length 6 in.
GFCI to Switch Cord Length 6 ft.
GFCI: 7 in. x 2 1/2 in. x 1 in.
Color: Black
Class: A-Rainproof
AMP: 15
Hz: 60
Watt 1875
Volt 125
Reset Type Automatic
Cord Diameter Range .28 - .65
Electrical: UL, NEMA, GFCI Protected
UL File: E464499
Limit Switch Bracket: Bracket Included (Limit Switch Optional)
Packaging: 15 ft. x 2 ft. x 2 ft. Wood Crate
Shipping Weight: 1,350 lbs.
All BH-USA boat lifts are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility.

Tech Guides

Coastal Series Pile Mount Spacing Manual

Reviews

0 review for #30,000 lb. Aluminum Eight Post Pile Mount Lift

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top