About this Item
- Hot-dipped galvanized steel
- Welded “dead man” compounding tabs
- 6,000 lbs. Capacity per Beam
- Strong, heavy-duty design
- 13 ft. x 6 in. web x 4 in. flange structural beam
- 2 3/8 in. OD / 2 in. ID drive pipe
The 12K Galvanized Four Post Pile Mount Top Beam is designed for mounting on pre-existing dock pilings. Made from heavy-duty wide-flange structural galvanized steel beams. Measures 13 ft. from end to end. Made by BH-USA.
Beam Only w/ Dead Man Brackets
(1) #BH04787 – 12K 13′ Galvanized Top Beam w/ Dead Man Brackets
Single Beam w/ GPA
#BH04787 – 12K 13′ Galvanized Top Beam w/ Dead Man Brackets
#12594 – 4,000 lb. Deluxe Powdercoated Gear Plate Assembly
#20363 – Bright White Flat Plate Hoist Back Cover
#20362 – Bright White BH-USA Logo Flat Plate Hoist Front Cover
#75687 – 10K-12K Galvanized Lift Hardware & Cable Kit
Two Beams w/ Hoist
(2) #BH04787 – 12K 13′ Galvanized Top Beam w/ Dead Man Brackets
(2) #12594 – 4,000 lb. Deluxe Powdercoated Gear Plate Assembly
(1) #17538 – 10K-12K Galvanized Lift Hardware & Cable Kit
(2) #20363 – Bright White Flat Plate Hoist Back Cover
(2) #20362 – Bright White BH-USA Logo Flat Plate Hoist Front Cover
(1) #79615 – Elite 1 HP Painted 56 Frame Boat Lift Motor – Maintained / 110v / 16 ft.
(2) #84223 – 31 ft. 5/16″ Cut to Length Galvanized Steel Cable
(1) #79615-45 – Elite 1 HP Painted 56 Frame Boat Lift Motor – Maintained / 110v/ 45 ft.
Specifications
Beam Only w/ Dead Man Brackets
| Capacity / Per Beam: |
6,000 lbs. |
| Top Beam Dimensions: |
13 ft. x 6 in. Web x 4 in. Flange |
| Top Beam Material: |
Steel WF Beam |
| Drive Pipe Support: |
Dual |
| Drive Pipe Type: |
Sch. 40 |
| Drive Pipe Finish: |
Hot-dipped Galvanized |
| Drive Pipe OD: |
2 3/8 in. |
| Drive Pipe ID: |
2 in. |
| Pipe Bearings: |
Galvanized Support |
| Bearing Maintenance: |
Greaseable |
| Grease Fitting Size: |
1/4 in. |
| Grease Fitting Style: |
Press-In |
| Dead Man Brackets: |
Pre-Installed |
| Compounding Tabs: |
Welded |
| Cable Winders: |
Not Included |
Single Beam w/ GPA
| Capacity / Per Beam: |
6,000 lbs. |
| Top Beam Dimensions: |
13 ft. x 6 in. Web x 4 in. Flange |
| Top Beam Material: |
Steel WF Beam |
| Drive Pipe Support: |
Dual |
| Drive Pipe Type: |
Sch. 40 |
| Drive Pipe Finish: |
Hot-dipped Galvanized |
| Drive Pipe OD: |
2 3/8 in. |
| Drive Pipe ID: |
2 in. |
| Pipe Bearings: |
Galvanized Support |
| Bearing Maintenance: |
Greaseable |
| Grease Fitting Size: |
1/4 in. |
| Grease Fitting Style: |
Press-In |
| Dead Man Brackets: |
Pre-Installed |
| Cable Winders: |
Not Included |
| Welded: |
Yes |
| Rigging: |
5/16" Stainless Steel Boat Lift Cable |
| Drive Pipe: |
2" ID Sch 40 HDG |
| Compound Tabs: |
Welded Tabs |
| Cable Length: |
31 ft. |
| Compounding: |
4 in. Blocks |
| Shackles: |
5/8" 3.25 Top Shackles (Attaches Block to Cradle) |
| GPA Rated Capacity: |
4,000 lbs. |
| GPA Tested Capacity: |
Straight line |
| GPA Dimensions: |
2 ft. x 1 ft. |
| GPA Bull Gear Ratio: |
96:1 |
| GPA Back Plate Bearing: |
Bronze Composite |
| GPA 96 Tooth Gear Material: |
Cast Iron |
| GPA Worm Material: |
Hardened Bronze |
| GPA Hoist Pulley Size: |
10 in. |
| GPA Hoist Pulley Material: |
Zinc die-cast |
| GPA Drive Belt Size: |
34 in. |
| GPA Drive Belt Type: |
AX-34 cogged belt |
| GPA Weight: |
34-47 lbs. |
| GPA Warranty: |
Lifetime |
Two Beams w/ Hoist:
| Capacity / Per Beam: |
6,000 lbs. |
| Top Beam Dimensions: |
13 ft. x 6 in. Web x 4 in. Flange |
| Top Beam Material: |
Steel WF Beam |
| Drive Pipe Support: |
Dual |
| Drive Pipe Type: |
Sch. 40 |
| Drive Pipe Finish: |
Hot-dipped Galvanized |
| Drive Pipe OD: |
2 3/8 in. |
| Drive Pipe ID: |
2 in. |
| Pipe Bearings: |
Galvanized Support |
| Bearing Maintenance: |
Greaseable |
| Grease Fitting Size: |
1/4 in. |
| Grease Fitting Style: |
Press-In |
| Dead Man Brackets: |
Pre-Installed |
| Cable Winders: |
Not Included |
| Welded: |
Yes |
| Rigging: |
5/16" Stainless Steel Boat Lift Cable |
| Drive Pipe: |
2" ID Sch 40 HDG |
| Compound Tabs: |
Welded Tabs |
| Cable Length: |
31 ft. |
| Compounding: |
4 in. Blocks |
| Shackles: |
5/8" 3.25 Top Shackles (Attaches Block to Cradle) |
| GPA Rated Capacity: |
4,000 lbs. |
| GPA Tested Capacity: |
Straight line |
| GPA Dimensions: |
2 ft. x 1 ft. |
| GPA Bull Gear Ratio: |
96:1 |
| GPA Back Plate Bearing: |
Bronze Composite |
| GPA 96 Tooth Gear Material: |
Cast Iron |
| GPA Worm Material: |
Hardened Bronze |
| GPA Hoist Pulley Size: |
10 in. |
| GPA Hoist Pulley Material: |
Zinc die-cast |
| GPA Drive Belt Size: |
34 in. |
| GPA Drive Belt Type: |
AX-34 cogged belt |
| GPA Weight: |
34-47 lbs. |
| GPA Warranty: |
Lifetime |
| Motor Type: |
56 Frame (Clawfoot) |
| Motor Brand: |
Elite |
| Motor Size: |
1 HP |
| Motor Finish: |
Painted Black |
| Motor Max Run Time: |
15 minutes |
| Motor Voltage: |
110v |
| Motor Style: |
TENV |
| Motor Shaft Diameter: |
5/8 in. |
| Boat Lift Switch Type: |
Maintained |
| Control Cable Length: |
16 ft. / 45 ft. |
| Protection Type: |
GFCI |
| GFCI Type: |
In-Line |
BH-USA Galvanized 4 post lifts are individually crated and can only be shipped via motor freight. Product shipped motor freight is the purchaser's responsibility to arrange for a delivery address that is accessible and has a fork truck available. If a Fork Truck is not available you can arrange to hand unload the crate. BH-USA will request a call from the freight company to the purchaser to help facilitate this arrangement. Missed deliveries can incur extra freight charges that will be the purchaser’s responsibility. All galvanized top beams come with the welded dead-man tab for compounding. The 12,000 lb. rating is based on the use of both top beams mounted to the top of pilings and compounding the overall lift. The 4 post lifts are engineered to work with BH-USA rated Cradles only or use with BH-USA polyester rated slings. Custom cradles or plat-forms are used at the end-users risk and BH-USA cannot be held liable for failure caused by non-BHUSA equipment or use outside intended design.
BH-USA Equipment Guide
Reviews
0 review for #12K Galvanized Four Post Pile Mount Top Beam