12,000 lb. Aluminum Four Post Pile Mount Boat Lift

  • No Weld Design
  • Marine Grade 6061-T6 USA Aluminum
  • Rated Up to 12,000 lbs.
  • Aluminum Bunks Included
  • Stainless Steel Fasteners Included
  • Complete & Ready to Install

From$7,164.02

Clear Selection and Start Over

About this Item

  • No Weld Design
  • Marine Grade 6061-T6 USA Aluminum
  • Rated Up to 12,000 lbs.
  • Aluminum Bunks Included
  • Stainless Steel Fasteners Included
  • Complete & Ready to Install

12,000 lb. Aluminum Four Post Pile Mount Boat Lift

The 12,000 lb. Aluminum Four Post Pile Mount Boat Lift is designed to mount on the tops of four dock pilings. The lift uses a 33 ft. cable compounded configuration. This results in a 12,000 lb. lift capacity rating. Features no-weld design. Made of 6061-T6 US aluminum. Made by Coastal SeriesBracket long bolts for pilings not included.

Freight Shipping Policy

Questions about shipping? Review our shipping policy

Lifting Capacity Hoist Size Style Hoist Type Motor Horsepower Motor Finish Frame Piling Amount Cable Configuration Thickness Length
6,000 lbs. 4,000 lb.  Standard Gear Plate 3/4 HP  Painted Clawfoot 4 Straight-Line 5/16 in. 15 ft.
6,000 lbs. A-Drive 40:75  Double Worm Reducer Direct Drive 3/4 HP  Stainless steel  C-Face 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. 4,000 lb. Standard Gear Plate 1 HP Painted Clawfoot 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. A-Drive 40:75  Double Worm Reducer Direct Drive 1 HP Stainless steel C-Face 4 Straight-Line 5/16 in. 15 ft.
9,000 lbs. 4,000 lb.  Standard Gear Plate 1 HP Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
9,000 lbs. A-Drive 40:75   Double Worm Reducer Direct Drive 1 HP  Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
12,000 lbs. 4,000 lb.  Standard Gear Plate 3/4 HP  Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
12,000 lbs. A-Drive 40:90  Double Worm Reducer Direct Drive 1 HP  Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
16,000 lbs. 6,500 lb.  Deluxe Gear Plate 1 HP  Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
16,000 lbs. A-Drive 40:90 Double Worm Reducer Direct Drive 1 HP Stainless steel C-Face 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 8,500 lb. Advanced Dual Pulley Gear Plate 1 1/2 HP Painted Clawfoot 4 Compounded 5/16 in. 33 ft.
20,000 lbs. A-Drive 40:90 Double Worm Reducer Direct Drive 1 1/2 HP Stainless steel  C-Face 4 Compounded 5/16 in. 33 ft.

Specifications

Capacity 12,000 lbs.
Cable Diameter 5/16 in.
Cable Make Stainless Steel
Cable Length 33 ft.
Cable Configuration Compounded
Minimum Piling Size 8 in. (diameter)
Electrical UL, NEMA, GFCI Protected
UL File E464499
Limit Switch Bracket Bracket Included, Limit Switch Optional
Packing Wood Crate 15 ft. x 2 ft. x 2 ft.
Weight 900-950 lbs.

12K-20K Aluminum Four Post Pile Mount Top Beam

Lifting Capacity: 10,000 lbs / Beam
Top Beam Dimensions: 12 ft. 7 in. L x 3 1/2 in. W x 6 in. H
Top Beam Type: Channel
Top Beam Material: 6061-T6 US Aluminum
Drive Pipe Finish: Hot-Dipped Galvanized
Drive Pipe Type: Sch. 40
Beam Weight: 4.715 lbs. / ft.
Pipe Bearings: 4 / Beam
Pipe Bearings Material: Bronze
Bearing Maintenance Grease Fittings
Grease Fitting Size: 1/4 in.
Cable Winders: 2
Cable Winder Style: Side-Mounted (Boat Lift Style)
Cable Winder Type: Single Direction
Cable Winder Fits: 1.5 in. ID Drive Pipe
Drive Pipe Dimensions: 12 ft. 4.5 in. L (1,5 in. ID)
Fasteners Stainless Steel

8" Aluminum Cradle Beam w/ Sheave Housings

Cradle BeamDimensions: 12 ft. 6 in. L x 6 in. H x 5 in. Flange
Cradle Beam Weight: 78.83 lbs.
Cradle Beam Material: 6061-T6 US aluminum
Sheave Housing Measurements: 6 in. L x 4 in. W x 5 1/2 in. H
Sheave Housing Fits: 5 in. flange (I-beam)
Sheave Housing Fasteners: 316 stainless steel
Sheave Housing Accepts: 4 in. sheave w/ bronze bushing
Sheave Bolt Bore: 3/4 in.
Sheave Housing Material: 6061-T6 US aluminum
Sheave Mounting Hex Head Bolts: (4) 1/2 in. x 2 1/2 in. stainless steel
Sheave Housing Lock Washers: (4) 1.2 in. stainless steel
Sheave Housing Nuts: (4) 1/2 in. stainless steel

8 in. x 14 ft. Prefabricated Aluminum Cradle Bunk

Dimensions: 14 ft. x 8 in. H x 5 in. flange
Max Flange Size: 5 in. Flange
Angle: 19 degrees
Weight: 2.898 lbs. / linear ft.
Material: Marine-grade 6061-T6 US aluminum
Padding: Rubber
Padding Color: Black
Shipment: Loose Beam / Freight

4,000 lb. Standard Gear Plate Assembly (Flat-Plate Hoist)

Rated Capacity: 4,000 lbs.
Tested Capacity: Straight line
Gear Plate Dimensions: 2 ft. x 1 ft.
Bull Gear Ratio: 96:1
Back Plate Bearing: Bronze Composite
96 Tooth Gear Material: Cast Iron
Worm Material: Hardened Bronze
Hoist Pulley Size: 10 in.
Hoist Pulley Material: Zinc die-cast
Drive Belt Size: 34 in.
Drive Belt Type: AX-34 cogged belt
Weight: 34-47 lbs.
Warranty: Lifetime
Manufacturer: BH-USA

Elite 3/4 HP 56 Frame Painted Boat Lift Motor (Flat-Plate Hoist)

Model #: 93197 Max Run Time: 15 Minutes
Dimensions: 8 in. x 9 1/2 in. x 6 1/2 in. Weight: 24 lbs. (Motor Only)
Catalog #: N/A SKU: 60420
Horsepower: .75 Mounting Type: C
RPM: 1725 Service Factor: 1.0
Voltage: 115/230 Phase: 1
Amps: 10.8/5.4 SFtartA: N/A
Herz: 60 AMB: 40
Frame: 56 HSG: TENV
Code: L Insulation: B
Shaft Diameter 5/8 in.

A-Drive 40:90 Double Worm Reducer Gearbox (Direct Drive Hoist)

Type: 40:90
Actual Ratios: 450:1
Material: Aluminum
Grease: Special blend
Lubrication: Permanent
Motor Mount: C-Face
Manufacturer: BH-USA
Warranty: 5 Year
Motor Input: Rotational 360 Degrees
Fasteners: Stainless Steel

Elite 1 HP C-Face Stainless Steel Boat Lift Motor (Direct Drive Hoist)

Model #: 93048 Max Run Time: 15 Minutes
Dimensions: 9" x 10 1/2" x 6 1/4" Weight: 33 lbs.
Catalog #: N/A SKU: N/A
Horsepower: 1 Mounting Type: C
RPM: 1725 Service Factor: 1.15
Voltage: 115 / 230 Phase: 1
Amps: 7.8 SFtartA: N/A
Herz: 60 AMB: 40c
Frame: 56c HSG: TENV
Code: L Insulation: A
Shaft Diameter 5/8"
All BH-USA top beams are individually crated and ship via motor freight. Items shipped freight are the purchasers' responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers' responsibility. The purchaser must be present during delivery. For more questions, visit our shipping terms and conditions.

Tech Guides

6,000 lbs.-16,000 lbs. Aluminum Four Post Lift Guide
Coastal Series Pile Mount Spacing Manual

Reviews

0 review for #12,000 lb. Aluminum Four Post Pile Mount Boat Lift

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top