Important Information About BH-USA Operations & Ordering during the Coronavirus Pandemic

10″ Aluminum Structural Beam

  • Made from marine-grade 6061-T6 US aluminum
  • 10 in. web x 6 in. flange
  • Drilling into the beam changes its integrity
  • 8.646 lbs. Wt/Lin ft.
  • 16 ft. ships loose freight / 25 ft. is local pickup only

From$576.00

Clear Selection and Start Over

About this Item

  • Made from marine-grade 6061-T6 US aluminum
  • 10 in. web x 6 in. flange
  • Drilling into the beam changes its integrity
  • 8.646 lbs. Wt/Lin ft.
  • 16 ft. ships loose freight / 25 ft. is local pickup only

10″ Aluminum Structural Beam

The 10″ Aluminum Structural Beam is an extruded raw aluminum I-beam. Made from marine-grade 6061-T6 US aluminum. 10 in. web x 6 in. flange measurements. The beam weighs 8.646 lbs. per linear foot. Drilling into the beam compromises the beam’s integrity. The 16 ft. beam can be shipped, freight loose beam. The 25 ft. beam is local pickup only. Sold by BH-USA.

6061-T6 Marine-Grade US Aluminum

6061-T6 is an all-around popular grade of aluminum. Commonly used in marine applications. Very good corrosion resistance and is precipitation hardened. These grades, for the most part, have additional chromium and manganese to help protect them from corrosive marine conditions. The aluminum structural beam falls into this category.

T6 temper 6061 US Aluminum

T6 temper 6061 has an ultimate tensile strength of at least 290 MPa (42,000 psi) and yield strength of at least 240 MPa (35,000 psi). More typical values are 310 MPa (45 ksi) and 270 MPa (39 ksi), respectively. In thicknesses of 6.35 mm (0.250 in) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The typical value for thermal conductivity for 6061-T6 at 25 °C (77 °F) is around 152 W/m K. A material data sheet defines the fatigue limit under cyclic load as 97 MPa (14,000 psi) for 500,000,000 completely reversed cycles using a standard RR Moore test machine and specimen.

Specifications

Web: 10 in.
Flange: 6 in.
Web Thickness: .250 in.
Flange Thickness: .410 in.
Beam Wt/Lin ft.: 8.646 lbs.
Material: 6061-T6 US Aluminum
Material Type: Extruded
Material Environment: Marine
Shipment: Loose Freight / Local Pickup Only
All boat cradles, cradle beams, and boat lift ship freight. It is the responsibility of the purchaser to unload the freight from the delivery truck. The purchaser must be present during delivery. For more questions, visit our shipping terms and conditions.

Tech Guides

Overhead Boat Lift Guide

Reviews

0 review for #10″ Aluminum Structural Beam

Email Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Email Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Back to Top